did you ever find a solution? I have the same problem on a SuperMicro based system... FC drops and it causes Windows to loose connection and copying files fails... br, Rune ________________________________________ From: OmniOS-discuss <[email protected]> on behalf of Mark <[email protected]> Sent: Sunday, September 14, 2014 11:30 AM To: [email protected] Subject: Re: [OmniOS-discuss] Fibre Target problems
On 11/09/2014 9:25 p.m., OSN | Marian Fischer wrote: > Hi, > > do you have Sync=disabled in ZFS / ZPOOL settings? > If not, this can cause the slow speed ... No, but I didn't with OI either, and it has no issues achieving 400+ Mbytes/sec and doesn't have link loss issues. > > Mit besten Gruessen > > Marian Fischer > -- > OSN Online Service Nuernberg GmbH http://www.osn.de > Bucher Str. 78 Tel: 0911/39905-0 > 90408 Nuernberg Fax: 0911/39905-55 > HRB 15022 Nuernberg, Ust-Id: DE189301263 GF: Joerg Goltermann > > -----Ursprüngliche Nachricht----- > Von: OmniOS-discuss [mailto:[email protected]] Im > Auftrag von Mark > Gesendet: Donnerstag, 11. September 2014 09:57 > An: [email protected] > Betreff: [OmniOS-discuss] Fibre Target problems > > I have a Supermicro X7DWN+ based server with 24 x 4Tb SAS disks on a LSI > 6G IT mode hba. > > After configuring a bunch of 10Tb Luns and presenting to a Win2012 > server, write is very slow < 6 Mb/sec, and writing causes the Fc link to > drop repeatedly. > Reads reach about 400Mb/sec. > > OmniOS version is r151006_057. > > I've tried two different 4G and an 8G QLogic adapters, via switch or > direct, but there is no change in behaviour. Only 1 HBA and path. > > The odd thing is the exact same hardware and os setup (fct, zpool etc.) > works well with OI or Solaris 11/11, with writes getting around 4-500 > Mb/sec. > I had to start with OI147 and work up, as the later text installer is > very buggy. Upgrading OI with qlt installed fails. > > I'm at a bit of a loss as to a likely cause. > > Anyone have any pointers ? > > > Some details and log: > > HBA Port WWN: 2100001b320aba27 > Port Mode: Target > Port ID: 10100 > OS Device Name: Not Applicable > Manufacturer: QLogic Corp. > Model: QLE2460 > Firmware Version: 5.2.1 > FCode/BIOS Version: N/A > Serial Number: not available > Driver Name: COMSTAR QLT > Driver Version: 20100505-1.05 > Type: F-port > State: online > Supported Speeds: 1Gb 2Gb 4Gb > Current Speed: 4Gb > Node WWN: 2000001b320aba27 > Link Error Statistics: > Link Failure Count: 0 > Loss of Sync Count: 0 > Loss of Signal Count: 0 > Primitive Seq Protocol Error Count: 0 > Invalid Tx Word Count: 4 > Invalid CRC Count: 0 > > > > prtconf > > value='ISP2432-based 4Gb Fibre Channel to PCI Express HBA' > name='subsystem-name' type=string items=1 > value='unknown subsystem' > Device Minor Nodes:dev=(3,1) > dev_path=/pci@0,0/pci8086,4027@7/pci8086,3500@0/pci8086,3510@0/pci1077,137@0 > :qlt1 > > echo "*stmf_trace_buf/s" | mdb -k > > 0xffffff090f7c0000: qlt1,0:0001318: iport is ffffff090f1921b8 > > :0003718: Imported the LU 600144f09cdd9224000053f56a5c0005 > :0003719: Imported the LU 600144f09cdd9224000053f56a5d0006 > :0003721: Imported the LU 600144f09cdd9224000053f56a5d0007 > :0003722: Imported the LU 600144f09cdd9224000053f56a5e0008 > :0003725: Imported the LU 600144f09cdd9224000053f56a5e0009 > :0003726: Imported the LU 600144f09cdd9224000053f56a5f000a > :0003728: Imported the LU 600144f09cdd9224000053f56a5f000b > qlt1,0:0003815: Async event 8010 mb1=f8e8 mb2=c108, mb3=0, mb5=3362, mb6=0 > qlt1,0:0003815: Async event 8011 mb1=3 mb2=c108, mb3=0, mb5=3362, mb6=0 > qlt1,0:0003815: port state change from 0 to e > qlt1,0:0003815: Async event 8014 mb1=ffff mb2=6, mb3=0, mb5=3362, mb6=0 > qlt1,0:0003815: Posting unsol ELS 3 (PLOGI) rp_id=e8 lp_id=ef > qlt1,0:0003815: Rcvd PLOGI with wrong lportid ef, expecting 0. Killing ELS. > qlt1,0:0003815: port state change from e to 4 > qlt1,0:0004216: Posting unsol ELS 3 (PLOGI) rp_id=e8 lp_id=ef > qlt1,0:0004216: Processing unsol ELS 3 (PLOGI) rp_id=e8 > qlt1,0:0004216: Posting unsol ELS 20 (PRLI) rp_id=e8 lp_id=ef > qlt1,0:0004216: Processing unsol ELS 20 (PRLI) rp_id=e8 > qlt1,0:7247736: Posting unsol ELS 5 (LOGO) rp_id=e8 lp_id=ef > qlt1,0:7247736: Processing unsol ELS 5 (LOGO) rp_id=e8 > qlt1,0:7247736: handling LOGO rp_id e8. Triggering cleanup > :7248836: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff0931089a00 > qlt1,0:7248836: port state change from 4 to 11 > :7248836: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff0931089a00 > qlt1,0:7248836: port state change from 11 to 11 > :7248836: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff0931089a00 > qlt1,0:7248936: port state change from 11 to 11 > :7248936: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff0931089a00 > qlt1,0:7249036: port state change from 11 to 11 > :7249036: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff0931089a00 > qlt1,0:7249136: port state change from 11 to 11 > qlt1,0:7249136: Killing ELS 5 cond 1 > qlt1,0:7249136: Processing sol ELS 5 (LOGO) rp_id=e8 > qlt1,0:7249136: handling LOGO rp_id e8. Triggering cleanup > qlt1,0:7249236: port state change from 11 to 11 > qlt1,0:7249336: port state change from 11 to 11 > qlt1,0:7249336: port state change from 11 to 11 > qlt1,0:7249436: port state change from 11 to 11 > qlt1,0:7249536: port state change from 11 to 11 > qlt1,0:7249536: handling LOGO rp_id e8, waiting for cmds to drain > qlt1,0:7249636: port state change from 11 to 11 > qlt1,0:7249736: port state change from 11 to 11 > qlt1,0:7249836: port state change from 11 to 11 > qlt1,0:7249936: port state change from 11 to 11 > qlt1,0:7250036: port state change from 11 to 11 > qlt1,0:7250136: port state change from 11 to 11 > qlt1,0:7250236: port state change from 11 to 11 > :7250236: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250336: port state change from 11 to 11 > :7250336: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250336: port state change from 11 to 11 > :7250336: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250436: port state change from 11 to 11 > :7250436: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250536: port state change from 11 to 11 > :7250536: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250636: port state change from 11 to 11 > :7250636: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250736: port state change from 11 to 11 > :7250736: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250836: port state change from 11 to 11 > :7250836: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7250936: port state change from 11 to 11 > :7250936: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7251136: port state change from 11 to 11 > :7251136: fct_port_shutdown: port-ffffff090f1920b8, fct_process_logo: > unable to clean up I/O. iport-ffffff090f1921b8, icmd-ffffff091c5549d0 > qlt1,0:7251236: port state change from 11 to 11 > > > > > _______________________________________________ > OmniOS-discuss mailing list > [email protected] > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > > _______________________________________________ > OmniOS-discuss mailing list > [email protected] > http://lists.omniti.com/mailman/listinfo/omnios-discuss > _______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss _______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss
