Hi! -----Graham Stephens <[email protected]> skrev: ----- Till: Johan Kragsterman <[email protected]> Från: Graham Stephens <[email protected]> Datum: 2015-06-26 16:24 Kopia: [email protected] Ärende: Re: Ang: [OmniOS-discuss] KVM vnics not starting
On 26/06/2015 14:37, Johan Kragsterman wrote: > Hi! > > > -----"OmniOS-discuss" <[email protected]> skrev: ----- > Till: [email protected] > Från: Graham Stephens > Sänt av: "OmniOS-discuss" > Datum: 2015-06-26 11:20 > Ärende: [OmniOS-discuss] KVM vnics not starting > > Guys, > > Does anyone else here have problems trying to start a kvm due to vnics > not initializing properly? It seems to me that the more vnics you add, > the more likely the problem is to occur. > The firewall that I'm trying to build currently has four vnics attached, > and I'm intending to add more before I'm finished - but frequently when > I try to start it one will fail to 'catch' (like starting an old car) > and kvm fails. It's usually the third or fourth vnic, but not always. I > have to keep retrying the start script, and eventually it will work but > it can take five minutes for the darn thing to come up. > > Is there a setting I have missed? > > > > I've never seen this! > > I have used VM firewalls/routers with 5 vnic's or more, never seen it. > > Johan > Hi Johan, Can I ask some questions (speculations)? Are you running the VMs from inside zones? No VM's inside zone's, so far.... Are they attached to physical nics or virtual ones? That I don't understand, VM's needs virtual nics? Perhaps you mean vnic attached to etherstubs? I use both sorts, both to etherstubs and to phys nics. Are you using hyperthreaded CPUs? Yes, I use HT. Johan Perhaps one of these might make a difference. Graham. _______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss
