Oof, I realized I may not have been clear in how I worded that. What I meant to 
ask is:

What happens when you set en_10gfdx_cap to 0, then back to 1 ?

> On Oct 12, 2016, at 12:23 PM, Garland McAlexander <garl...@bustle.com> wrote:
> 
> Hah, yes, I tried with both interface 0 and 1.
> 
> Changing that back and forth has no change.
> 
> Both ixgbe0 and ixgbe1 will show as either 1000 when my switch ports are set 
> to auto, and will show as STATE - Down and SPEED - 0 when I set my switch 
> ports to 10GbE.
> 
> On Wed, Oct 12, 2016 at 12:19 PM, Dale Ghent <da...@omniti.com> wrote:
> 
> I trust you set N to the interface instance of ixgbe :) (eg; ixgbe0)
> 
> how about setting that to 0, then back to 1?
> 
> /dale
> 
> > On Oct 12, 2016, at 11:59 AM, Garland McAlexander <garl...@bustle.com> 
> > wrote:
> >
> > Yes, I'm getting a 1GbE link.
> >
> > Randomly it'll work as 10GbE after a reboot, but another reboot will cause 
> > it to go back to 1GbE.
> >
> > Running 'dladm set-linkprop en_10gfdx_cap=1 ixgbeN' has no change.
> >
> > On Fri, Oct 7, 2016 at 1:07 PM, Dale Ghent <da...@omniti.com> wrote:
> > On Oct 7, 2016, at 11:44 AM, Garland McAlexander <garl...@bustle.com> wrote:
> > >
> > > Hi All,
> > >
> > > I'm unable to link at 10GbE with my onboard X540 (X10DRW-iT). It works 
> > > perfectly fine at 10GbE if using Windows or CentOS on the same machine. 
> > > Just to be safe, I've tried multiple switches and Cat6a cabling.
> > >
> > > Any tips on how to get this going?
> >
> > Are you getting a 1Gb link instead of a 10Gb link?
> >
> > Can you run this:
> >
> > dladm set-linkprop en_10gfdx_cap=1 ixgbeN
> >
> > And check the link speed afterwards (dladm show-phys)
> >
> > /dale
> >
> >
> >
> >
> > --
> > Garland McAlexander
> >
> > Technology Manager
> >
> > E: garl...@bustle.com
> >
> > <image001.png>
> >
> 
> 
> 
> 
> -- 
> Garland McAlexander
> 
> Technology Manager
> 
> E: garl...@bustle.com
> 
> <image001.png>
> 

_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Reply via email to