Hi,
After install kernel on ZFS root (Install -G kernel.orig -k i86pc) it
cannot find root filesystems (hg revision 6857) ...
I rebooted it with 'reboot -- 'kernel.orig/unix'.
module /platform/i86pc/kernel.orig/unix: text at [0xfe800000,
0xfe8e3627] data at 0xfec00000
module /platform/i86pc/kernel.orig/genunix: text at [0xfe8e3628,
0xfeb19d1f] data at 0xfec4be00
Loading kmdb...
module /platform/i86pc/kernel.orig/misc/kmdbmod: text at [0xfeb19d20,
0xfeb81737] data at 0xfec97820
module /platform/i86pc/kernel.orig/misc/ctf: text at [0xfeb81738,
0xfeb88a0f] data at 0xfeca8390
SunOS Release 5.11 Version ON-20080612_6857-d 32-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
DEBUG enabled
features:
1003fff<cpuid,sse,sep,pat,cx8,pae,mca,mmx,cmov,de,pge,mtrr,msr,tsc,lgpg>
mem = 1572412K (0x5ff8f000)
initialized model-specific module 'cpu_ms.AuthenticAMD' on chip 0 core 0
strand 0
root nexus = i86pc
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
isa0 at root
pseudo-device: acpippm0
acpippm0 is /pseudo/acpippm at 0
pseudo-device: ppm0
ppm0 is /pseudo/ppm at 0
pci0 at root: space 0 offset 0
pci0 is /pci at 0,0
IDE device at targ 0, lun 0 lastlun 0x0
model ST340810A
ATA/ATAPI-6 supported, majver 0x7e minver 0x0
ata_set_feature: (0x66,0x0) failed
ata_set_feature: (0x66,0x0) failed
PCI-device: ide at 0, ata0
ata0 is /pci at 0,0/pci-ide at 2,5/ide at 0
UltraDMA mode 5 selected
cmdk0 at ata0 target 0 lun 0
cmdk0 is /pci at 0,0/pci-ide at 2,5/ide at 0/cmdk at 0,0
NOTICE: mount: not a UFS magic number (0x0)
panic[cpu0]/thread=fec24160: cannot mount root path
/pci at 0,0/pci-ide at 2,5/ide at 0/cmdk at 0,0:d
fec3c2bc genunix:rootconf+10b (c0f040, 1, fec238d0)
fec3c2e0 genunix:vfs_mountroot+54 (fe800010, fec380f0,)
fec3c304 genunix:main+f1 ()
panic: entering debugger (no dump device, continue to reboot)
Welcome to kmdb
kmdb: unable to determine terminal type: assuming `vt100'
Loaded modules: [ scsi_vhci uppc ufs unix krtld genunix specfs pcplusmp ]
It seems that grub entries are not created properly.
I created them manually, and my question is how can I know which kernel
file is loaded?
kernel/unix or kernel.orig/unix ?
--
Regards,
Piotr Jasiukajtis | estibi | SCA OS0072
http://estseg.blogspot.com
