Well I agree that format of openstack request wont work, but I know that we had dcae running in our lab based on DCAE-7. Carsten might have to debug this (I am not familiar with all the complexities of dcae startup)
Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: Josef Reisinger [mailto:[email protected]] Sent: Wednesday, June 21, 2017 12:26 PM To: ROSE, DANIEL V <[email protected]> Cc: [email protected]; Fabrice Livigni <[email protected]> Subject: RE: [onap-discuss] DCAE running or not? Hi Daniel, I read indeed that DCAE _should_ run run with the latest template... but I still see some issue which makes me believe it can't. To double check. I re-created the DCAE-VM (the one defined in the HEAT template) in openstack from the image, let the cloud init stuff run and got the same results as before. In particular The floatip heat template defined "artifacts_version: 1.1.0-SNAPSHOT", the cloud init downloads curl -k https://nexus.onap.org/content/sites/raw/org.openecomp.demo/boot/1.1.0-SNAPSHOT/dcae_install.sh<https://urldefense.proofpoint.com/v2/url?u=https-3A__nexus.onap.org_content_sites_raw_org.openecomp.demo_boot_1.1.0-2DSNAPSHOT_dcae-5Finstall.sh&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=ZfE4k8bAX-dFMxrRo43l3Z0WkV67_-tUXsxUxTd2P0M&s=e7yMbY_lDjpH1-Ao-dd0MQOTgvKi_z1MG8NbbpsL9ss&e=>-o /opt/dcae_install.sh Install.sh in turn creates, amongst other stuff files in /opt/dcae-startup-vm-controller/, where on of the files is docker-compose.yml which in turn names " dcae-controller: image: nexus3.onap.org:10001/openecomp/dcae-controller:1.0.0". In summary; have this docker image running as a container. When I look at the incoming network request on the controller, I can see that dcae-controller sends an request which is not compatible with the below mentioned Openstack specification of the v2.0 keystone interface and which is consequently responded to with "400 Bad request" POST /v2.0/tokens HTTP/1.1. Content-type: application/json. Host: 172.16.3.31:35357. Content-Length: 93. {"auth":{"RAX-KSKEY:apiKeyCredentials":{"username":"<some-user-here>","apiKey":"<some-key-here>"}}} HTTP/1.1 400 Bad Request. Date: Wed, 21 Jun 2017 15:56:59 GMT. Server: Apache/2.4.18 (Ubuntu). Vary: X-Auth-Token. X-Distribution: Ubuntu. x-openstack-request-id: req-7eac4b47-f21d-418b-955a-0333011ac380. Content-Length: 238. Connection: close. Content-Type: application/json. . {"error": {"message": "Expecting to find auth in request body. The server could not comply with the request since it is either malformed or otherwise incorrect. The client is assumed to be in error.", "code": 400, "title": "Bad Request"}} and results in an error message which I find with on dcaestartupvmcontroller_dcae-controller_1 in /opt/app/dcae-controller-platform-server/logs/controller-platform-server-controller.err m=[url:http://172.16.3.31:35357/v2.0/tokens<https://urldefense.proofpoint.com/v2/url?u=http-3A__172.16.3.31-3A35357_v2.0_tokens&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=ZfE4k8bAX-dFMxrRo43l3Z0WkV67_-tUXsxUxTd2P0M&s=DfjgtPRyRIND4bSA2wvxWwYfPCtNabXlsfHXE6MuHPA&e=>, method:POST, body:[auth:[RAX-KSKEY:apiKeyCredentials:[username:user, apiKey:abcdefghijklmno]]]] URL=http://172.16.3.31:35357/v2.0/tokens Header: Content-type: application/json REQUEST BODY: {"auth":{"RAX-KSKEY:apiKeyCredentials":{"username":"user","apiKey":":abcdefghijklmno"}}} Exchange done: 7 Now, as I trust you guys to have checked this piece already - what's going wrong with my setup? If somebody can point us to the place where the RAY-KSKEY payload is defined in the code would be well appreciated. Mit freundlichen Grüßen / Kind regards Josef Reisinger From: "ROSE, DANIEL V" <[email protected]<mailto:[email protected]>> To: Josef Reisinger <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: 21.06.2017 16:04 Subject: RE: [onap-discuss] A maybe dumb questions, but has anybody .. ... got the ONAP stack to work on vanilla Openstack. Yes we did... :-) ________________________________ The floatip heat stack should let dcae spin up in generic openstack Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Josef Reisinger Sent: Wednesday, June 21, 2017 3:49 AM To: [email protected]<mailto:[email protected]> Subject: [onap-discuss] A maybe dumb questions, but has anybody .. ... got the ONAP stack to work on vanilla Openstack. Yes we did... :-) Folks, as nobody replied success to this question, Yesterday I was able to deploy the first virtual firewall following the tutorial on a vanilla Openstack instance running on Ubuntu in an Softlayer data center. For me and the team this represents the first mile stone as I guess we are are pretty proud on it. The next two steps would now be to get de.sh appc <module> to run. I run in the same issue as described in https://wiki.onap.org/questions/6591979/.demo.sh-appc-demomodule-returns-an-error-keyerror-tenantid<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_questions_6591979_.demo.sh-2Dappc-2Ddemomodule-2Dreturns-2Dan-2Derror-2Dkeyerror-2Dtenantid&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=z_u4LaCZugd626srUfgcR8UQaC5nX4CCV2sDSUlul10&s=UAnrw6lMjDbZ3camd85Mx13XN4OdFcgfwbd7IayPGx8&e=>, but we do not run Contrail. So it may be a more general issue. Step #2 is DCAE ... and I can see that DCAE controller uses a Rackspace-specific request (at least it is not conforming to https://developer.openstack.org/api-ref/identity/v2/<https://urldefense.proofpoint.com/v2/url?u=https-3A__developer.openstack.org_api-2Dref_identity_v2_&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=z_u4LaCZugd626srUfgcR8UQaC5nX4CCV2sDSUlul10&s=aY3IEgcYmPITynoO3lwAGyb7N-JROQw-y98ZJmKdK3o&e=>). Anybody out there who could point to to the place where this is defined (hard-coded or in a config file) so that I can get a team member to adapt it to OpenStack? Mit freundlichen Grüßen / Kind regards Josef Reisinger __________________ Hmm.. doesn't work really... Same for /opt/portal_install.sh... once again my question: Anybody out there with sufficient luck to get an vanilla openstack instance and run the demo examples? I think I read here an there success stories and I wonder ... well.. I don't have the same :-) I used [cid:[email protected]] ubuntu@vm1-vid:~$ cat /opt/vid_install.sh <html> <head> <title>404 - Path /org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh not found in local storage of repository "raw" [id=raw]</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <link rel="icon" type="image/png" href="https://nexus.onap.org/favicon.png<https://urldefense.proofpoint.com/v2/url?u=https-3A__nexus.onap.org_favicon.png&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=z_u4LaCZugd626srUfgcR8UQaC5nX4CCV2sDSUlul10&s=Mtuc1YCwSEP2CEWXlwiv-S8QedXKPOoeW1-qs7Ii55Q&e=>"> <!--[if IE]> <link rel="SHORTCUT ICON" href="https://nexus.onap.org/favicon.ico<https://urldefense.proofpoint.com/v2/url?u=https-3A__nexus.onap.org_favicon.ico&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=z_u4LaCZugd626srUfgcR8UQaC5nX4CCV2sDSUlul10&s=4E56QTs6kCtEHrW0y9741YJ45MgHRL751i6VQSYUQyg&e=>"/> <![endif]--> <link rel="stylesheet" href="https://nexus.onap.org/static/css/Sonatype-content.css?2.14.2-01<https://urldefense.proofpoint.com/v2/url?u=https-3A__nexus.onap.org_static_css_Sonatype-2Dcontent.css-3F2.14.2-2D01&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=z_u4LaCZugd626srUfgcR8UQaC5nX4CCV2sDSUlul10&s=qbdno0K4JvoVSaiC-IyAFfulNFEBcFZcD5CgXztWxKc&e=>" type="text/css" media="screen" title="no title" charset="utf-8"> </head> <body> <h1>404 - Path /org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh not found in local storage of repository "raw" [id=raw]</h1> <p>Path /org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh not found in local storage of repository "raw" [id=raw]</p> </body> </html> Mit freundlichen Grüßen / Kind regards Josef Reisinger When wisdom comes to call, there's nobody listening at all - Pendragon / Man Of Nomadic Traits IBM Sales & Distribution, Communications Sector Certified IT-Architect Telecommunications IBM Certified Telecommunications Industry ITA Lehrbeauftragter an der Hochschule Fresenius IBM Deutschland Godesberger Allee 127 53175 Bonn Beuel Phone: +49 151 1426 4559 Mobile: +49-(0) 151 1426 4559 E-Mail: [email protected]<mailto:[email protected]> [The Open Group Master Certified]The Open Group Master Certified IT Architect [cid:[email protected]]Solution Advisor Cloud Computing [cid:[email protected]]Architect Profession Certification - Level 2 Expert [cid:[email protected]]Telecommunications Insights & Solutions Public: IBM TME Solution Labs Flyer<public.dhe.ibm.com/common/ssi/ecm/en/lbf03006usen/LBF03006USEN.PDF> Internal: IBM TME Solution Wiki<ibm.biz/tmewiki> Internal: TME Demo Video Series<ibm.biz/tmevideos> Internal: TME Demo App<ibm.biz/tmeapp> IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter Geschäftsführung: Martina Koederitz (Vorsitzende), Nicole Reimer, Norbert Janzen, Dr. Christian Keller, Ivo Koerner, Stefan Lutz Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart, HRB 14562 / WEEE-Reg.-Nr. DE 99369940 From: "FORSYTH, JAMES" <[email protected]<mailto:[email protected]>> To: Josef Reisinger <[email protected]<mailto:[email protected]>> Cc: "ROSE, DANIEL V" <[email protected]<mailto:[email protected]>>, "LUND, CARSTEN" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "KAJUR, HARISH V" <[email protected]<mailto:[email protected]>> Date: 13.06.2017 17:27 Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ... ________________________________ Hi, Josef, Yes, definitely. -jimmy From: Josef Reisinger [mailto:[email protected]] Sent: Tuesday, June 13, 2017 11:25 AM To: FORSYTH, JAMES <[email protected]<mailto:[email protected]>> Cc: ROSE, DANIEL V <[email protected]<mailto:[email protected]>>; LUND, CARSTEN <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; KAJUR, HARISH V <[email protected]<mailto:[email protected]>> Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ... Thanks James, that sounds absolutely reasonable and I tried adapt the docker version to 1.1.. which didn't give me a working portal. So left it as it was pre-configured in the template and trusted the comment "You don'T need to change other parameters" (or similar...). Do you think artifacts_version: 1.0.0-SNAPSHOT + docker_version: 1.0-STAGING-latest + gerrit_branch: release-1.0.0 will enhance the chance to get the ONAP stack working? Mit freundlichen Grüßen / Kind regards Josef Reisinger When wisdom comes to call, there's nobody listening at all - Pendragon / Man Of Nomadic Traits IBM Sales & Distribution, Communications Sector Certified IT-Architect Telecommunications IBM Certified Telecommunications Industry ITA Lehrbeauftragter an der Hochschule Fresenius IBM Deutschland Godesberger Allee 127 53175 Bonn Beuel Phone: +49 151 1426 4559 Mobile: +49-(0) 151 1426 4559 E-Mail: [email protected]<mailto:[email protected]> IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter Geschäftsführung: Martina Koederitz (Vorsitzende), Nicole Reimer, Norbert Janzen, Dr. Christian Keller, Ivo Koerner, Stefan Lutz Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart, HRB 14562 / WEEE-Reg.-Nr. DE 99369940 From: "FORSYTH, JAMES" <[email protected]<mailto:[email protected]>> To: "ROSE, DANIEL V" <[email protected]<mailto:[email protected]>>, "LUND, CARSTEN" <[email protected]<mailto:[email protected]>>, Josef Reisinger <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "KAJUR, HARISH V" <[email protected]<mailto:[email protected]>> Date: 13.06.2017 17:00 Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ... ________________________________ If you use the 1.1.0-SNAPSHOT artifacts, and the 1.0-STAGING-latest docker image, you will get a mismatch in the table name. 1.0 uses "vid_openecomp" and 1.1 uses "vid_openecomp_epsdk" Thanks, jimmy From: ROSE, DANIEL V Sent: Tuesday, June 13, 2017 10:51 AM To: LUND, CARSTEN <[email protected]<mailto:[email protected]>>; Josef Reisinger <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; FORSYTH, JAMES <[email protected]<mailto:[email protected]>>; KAJUR, HARISH V <[email protected]<mailto:[email protected]>> Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ... Sorry wrong thread for my previous reply! For robot vm we updated it to use tenant name (follow https://jira.onap.org/browse/TEST-28<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_TEST-2D28&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=Oej6QUk5p2KdqNEWySpOHA&m=GSFnU1wL3IRixJjC0dKcX_IEycoSlo5XSziesOuhOxc&s=vsHT3VgwlIPwtyzN3Z9P3uBxyjQvGHRxMxkxek3ltXw&e=>to see its testing progress) For vid jimmy can you check this? For aai can you check this harish? I think we figure out if its due to rebasing or not. Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: [email protected]<mailto:[email protected]>[mailto:[email protected]] On Behalf Of ROSE, DANIEL V Sent: Tuesday, June 13, 2017 10:36 AM To: LUND, CARSTEN <[email protected]<mailto:[email protected]>>; Josef Reisinger <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] A maybe dump questions, but has anybody ... ***Security Advisory:This Message Originated Outside of AT&T *** Reference http://cso.att.com/EmailSecurity/IDSP.htmlfor more information. You could ask someone from aai like Harish, Jimmy or Manisha as they also use Spotify Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: [email protected]<mailto:[email protected]>[mailto:[email protected]] On Behalf Of LUND, CARSTEN Sent: Tuesday, June 13, 2017 8:53 AM To: Josef Reisinger <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] A maybe dump questions, but has anybody ... ***Security Advisory:This Message Originated Outside of AT&T *** Reference http://cso.att.com/EmailSecurity/IDSP.htmlfor more information. For DCAE issue see DCAE-7. We are still working that and then have to document things better. Carsten From: [email protected]<mailto:[email protected]>[mailto:[email protected]] On Behalf Of Josef Reisinger Sent: Tuesday, June 13, 2017 8:48 AM To: [email protected]<mailto:[email protected]> Subject: [onap-discuss] A maybe dump questions, but has anybody ... ... got the ONAP stack to work on vanilla Openstack (We use Ocata) including running one demo from the tutorial using the HEAT template below without manual intervention? The only changes I made are the lines where the parameter values start with "PUT YOUR <xyz value> HERE" or so. I did especially not change any of * artifacts_version: 1.1.0-SNAPSHOT * docker_version: 1.0-STAGING-latest * gerrit_branch: release-1.0.0 I am asking since I get a lot of issues which I do not believe to relate to the fact we are on vanilla Openstack Ocata vs. Rackspace as there are: * Robot VM: I need to modify a couple of files to talk to the correct keystone endpoint, use the correct JSON in the token request and avoid SSL issues; After the manual config I get it to run demo.sh init * * VID VM: There is still some confusion on the database name to use as it seems. If I edit two files and remove the _epsdk from the DB name, at least the vid-mariadb container comes up and I can open the VID tab in the portal. * * A&AI: during install, I get a message that the aai/test-config project does not have a branch release-1.0.0 and the install is broken; if I change /opt/config/gerrit_branch.txt to contain "master", I can get AAI to run the docker images. (Btw, setting gerrit_branch to "master" in the HEAT file didn't give me working environment) model-router exits after a few seconds run ... docker logs gives a one-liner "starting model-loader", the log-directory /opt/aai/logroot/AAI-MODEL-LOADER/is empty * * DCAE: if I look in the logs of dcaestartupvmcontroller_dcae-controller_1 I find lots of '"exception": "java.lang.IllegalArgumentException: !Absolute URI: null/servers"' * * Tutorial: After fixing all the stuff above, I started the tutorial (which now has some licenses and VF added, cool!), but when I try to deploy one of them, there is not user pre-configured as it was before. Asking AAI with a REST call returns one: curl -k "-HX-TransactionId:$(uuidgen)" "-HX-FromAppId: test" "-HAccept:application/json" https://AAI:AAI@vm1-aai1:8443/aai/v8/business/customers/customer/|json_pp<https://urldefense.proofpoint.com/v2/url?u=https-3A__AAI-3AAAI-40vm1-2Daai1-3A8443_aai_v8_business_customers_customer_-257Cjson-5Fpp&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=xwIwsXCL_9NaWhWYmEKWhC0WlSfwKDMu9sMW__dnU58&e=> { "subscriber-type" : "INFRA", "resource-version" : "1497351232556", "global-customer-id" : "Demonstration", "subscriber-name" : "Demonstration", "service-subscriptions" : { "service-subscription" : [ { "resource-version" : "1497351232629", "service-type" : "vLB", "relationship-list" : { "relationship" : [ { "relationship-data" : [ { "relationship-key" : "cloud-region.cloud-owner", "relationship-value" : "Rackspace" }, { "relationship-key" : "cloud-region.cloud-region-id", "relationship-value" : "RegionOne" }, { "relationship-key" : "tenant.tenant-id", "relationship-value" : "a90952b7994341f4951fb5e97f829d0d" } ], "related-to" : "tenant", "related-link" : "https://vm1-aai1:8443/aai/v8/cloud-infrastructure/cloud-regions/cloud-region/Rackspace/RegionOne/tenants/tenant/a90952b7994341f4951fb5e97f829d0d<https://urldefense.proofpoint.com/v2/url?u=https-3A__vm1-2Daai1-3A8443_aai_v8_cloud-2Dinfrastructure_cloud-2Dregions_cloud-2Dregion_Rackspace_RegionOne_tenants_tenant_a90952b7994341f4951fb5e97f829d0d&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=wxJmKVsn2ZaWkcOuijQmhMgNuruiAVwTEHIs6qfuzhQ&e=>", "related-to-property" : [ { "property-key" : "tenant.tenant-name", "property-value" : "admin" } ] } ] } }, { "resource-version" : "1497351232580", "relationship-list" : { "relationship" : [ { "related-to" : "tenant", "related-link" : "https://vm1-aai1:8443/aai/v8/cloud-infrastructure/cloud-regions/cloud-region/Rackspace/RegionOne/tenants/tenant/a90952b7994341f4951fb5e97f829d0d<https://urldefense.proofpoint.com/v2/url?u=https-3A__vm1-2Daai1-3A8443_aai_v8_cloud-2Dinfrastructure_cloud-2Dregions_cloud-2Dregion_Rackspace_RegionOne_tenants_tenant_a90952b7994341f4951fb5e97f829d0d&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=wxJmKVsn2ZaWkcOuijQmhMgNuruiAVwTEHIs6qfuzhQ&e=>", "related-to-property" : [ { "property-key" : "tenant.tenant-name", "property-value" : "admin" } ], "relationship-data" : [ { "relationship-key" : "cloud-region.cloud-owner", "relationship-value" : "Rackspace" }, { "relationship-value" : "RegionOne", "relationship-key" : "cloud-region.cloud-region-id" }, { "relationship-key" : "tenant.tenant-id", "relationship-value" : "a90952b7994341f4951fb5e97f829d0d" } ] } ] }, "service-type" : "vFW" } ] } } Now, the question is: Did I do something terribly wrong or do you know the few modifications and/or tips & tricks to be made to get the ONAP stack and demos working on vanilla Openstack? Mit freundlichen Grüßen / Kind regards Josef Reisinger From: "PLATANIA, MARCO (MARCO)" <[email protected]<mailto:[email protected]>> To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: 09.06.2017 15:25 Subject: [onap-discuss] [installation] Heat template and instructions to run DCAE in vanilla OpenStack Sent by: [email protected]<mailto:[email protected]> ________________________________ All, I updated the wiki page about ONAP installation in vanilla OpenStack: https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_ONAP-2BInstallation-2Bin-2BVanilla-2BOpenStack&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=4ut2qdIcBxtCX25IF-8S4SoSiD6FzsEMf_N85GkLvCY&e=> There's a new paragraph (in blue) that highlights the necessary steps to run DCAE in OpenStack. Please use the following templates for installation: onap_openstack_float.yaml<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3Fp-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.yaml-3Bh-3D02feac7a8d183b7b5ef410395a30fdce8a79d3d7-3Bhb-3Drefs_heads_master&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=nYgqYyXmRgWY-vFrnRjb3nWRoq_rdLvyDyKu-uuxPVA&e=>and onap_openstack_float.env<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3Fp-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.env-3Bh-3Daed3a4bd0b996462e2b3823f0be06488138e85e2-3Bhb-3Drefs_heads_master&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=pI9LosrH6ndemtNzT6sQVEXJ-KkEUNSjrPW_LjOMeCQ&e=> Note, however, that DCAE team is still working on a DNS issue within the DCAE collector docker container. The issue is tracked in this Jira: https://jira.onap.org/browse/DCAE-7<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAE-2D7&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0&m=YgXut_fNaHFufkGc-B5nZSH4nRDRJ-5uYM5Gpc9mWCQ&s=F3uNQdTjfJnKrWVHukEUtiNmKabxaSqcZa44SleAzrg&e=> Finally, the Heat templates linked above include the new A&AI configurations. A&AI now has 2 VMs: one has the docker containers that run the A&AI logic and one has databases and third-party software dependencies. Thanks, Marco _______________________________________________ onap-discuss mailing list [email protected]<mailto:[email protected]> https://lists.onap.org/mailman/listinfo/onap-discuss<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.onap.org_mailman_listinfo_onap-2Ddiscuss&d=DwMFAw&c=LFYZ-o9_HUMeMTSQicvjIg&r=G7P6ajmMIva8VFVj0kle3avtPgyVjBbnnM53TmeR0u4&m=NIvvUVZpjzpc5nwVYNP6QBIDbx5whyS7ec4z9CM_V2o&s=YB-1Jjdzfd5EBmlz1ioFLT5WhRaKyCZuKqwCdDNohdg&e=>
_______________________________________________ onap-discuss mailing list [email protected] https://lists.onap.org/mailman/listinfo/onap-discuss
