Amichai please assit. BR,
Michael Lando Opensource & Frontend Team Lead, SDC AT&T Network Application Development · NetCom Tel Aviv | Tampa | Atlanta | New Jersey |Chicago ··········································································· Office: +972 (3) 5451487 Mobile: +972 (54) 7833603 e-mail: [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Kanagaraj Manickam Sent: Tuesday, July 04, 2017 12:36 PM To: Josef Reisinger <[email protected]>; Subhash Kumar Singh <[email protected]> Cc: [email protected] Subject: Re: [onap-discuss] [vid][portal] Robot VM Demo.sh is failingtoinitializecustomer As subash mentioned in earlier mail, we ran below command first and ROBOT test cases passed successfully. # demo.sh init_customer To double check, we have verified from A&AI and the customer named ‘Demonstration’ was created properly. Then we ran the command # demo.sh init At this time, test cases was failed with report, saying HTTP status code should be 201, but it was giving 200. As we have already created the customer with init_customer command, we have updated the test case to consider Status code 200 and proceed further, which helped us to run the init command successfully. At this point, VID shown up both vFW and vLB got listed. Now when we try to deploy vFW, VID is not listing any subscriber though init_customer is passed and A&AI reported them properly. So, Could someone from VID portal team, kindly help here to fix the issue ? Regards Kanagaraj M *************************************************************************************** 本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！************************************************************************************** *************************************************************************************** This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! *************************************************************************************** From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Josef Reisinger Sent: Wednesday, June 28, 2017 10:59 PM To: Subhash Kumar Singh Cc: [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] Robot VM Demo.sh is failingtoinitializecustomer Subhash, I had the same observation with new "new" HEAT template which uses 2 AAI VMs. reverting back to the previous HEAT template (with one VM for AAI) has solved this issue for me. Btw, running demo.sh init second time creates an error (I believe this is also discussed in this mailing list in the last week or the week before the last) Mit freundlichen Grüßen / Kind regards Josef Reisinger From: "Michael O'Brien" <[email protected]<mailto:[email protected]>> To: Subhash Kumar Singh <[email protected]<mailto:[email protected]>>, "Gaurav Gupta (c)" <[email protected]<mailto:[email protected]>>, "ROSE, DANIEL V" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: 28.06.2017 17:26 Subject: Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Sent by: [email protected]<mailto:[email protected]> ________________________________ Subhash, HI, just an observation – you may want to run demo.sh init (as it runs both ./demo.sh init_customer and ./demo.sh distribute) – you may be missing the models. See the recommended demo call here https://wiki.onap.org/display/DW/Tutorial%3A+Creating+a+Service+Instance+from+a+Design+Model#Tutorial:CreatingaServiceInstancefromaDesignModel-RunRobotdemo.shinit<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Tutorial-253A-2BCreating-2Ba-2BService-2BInstance-2Bfrom-2Ba-2BDesign-2BModel-23Tutorial-3ACreatingaServiceInstancefromaDesignModel-2DRunRobotdemo.shinit&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY&m=2m_UW6AwfZ0bC8OF0JScVHZTHa7L4AzUlX6zku4rEBA&s=Kqej_DDEmbbb3eG2RtAEjWo9DHroY2m4I1cY7ow_UWs&e=> /michael From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Subhash Kumar Singh Sent: Wednesday, June 28, 2017 11:13 To: Gaurav Gupta (c) <[email protected]<mailto:[email protected]>>; ROSE, DANIEL V <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Hello Everyone, We made some progress now all the service health-test-cases are passing except DCAE. Further, we tried to execute the robot test cases (demo.sh init_customer) to populate the customers after updating the keystone_get_auth.template [1] . We Observed that test cases are passed but we are not able to see the subscriber in the VID portal. Please let us know if we are missing some steps in execution of demo script. Following are the logs from robot execution : # ./demo.sh init_customer Starting Xvfb on display :89 with res 1280x1024x24 Executing robot tests at log level TRACE ============================================================================== OpenECOMP ETE ============================================================================== OpenECOMP ETE.Robot ============================================================================== OpenECOMP ETE.Robot.Testsuites ============================================================================== OpenECOMP ETE.Robot.Testsuites.Demo :: Executes the VNF Orchestration Test ... ============================================================================== Initialize Customer | PASS | ------------------------------------------------------------------------------ OpenECOMP ETE.Robot.Testsuites.Demo :: Executes the VNF Orchestrat... | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== OpenECOMP ETE.Robot.Testsuites | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== OpenECOMP ETE.Robot | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== OpenECOMP ETE | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== Output: /share/logs/demo/InitCustomer/output.xml Log: /share/logs/demo/InitCustomer/log.html Report: /share/logs/demo/InitCustomer/report.html Additionally, we observed that in robot trace logs that 'cloud-region.cloud-owner' value is set to 'Rackspace' but we have mentioned {'cloud_env' : 'openstack', .. } in '/opt/eteshare/config/vm_properties.py' . Following are the robot trace logs : Arguments: [ ${data_path}='/aai/v8/business/customers/customer/Demonstration' | ${data}={'global-customer-id': 'Demonstration', 'service-subscriptions': {'service-subscription': [{'relationship-list': {'relationship': [{'related-to': 'tenant', 'relationship-data': [{'relationship-key': 'cloud-region.cloud-owner', 'relationship-value': 'Rackspace'}, {'relationship-key': 'cloud-region.cloud-region-id', 'relationship-value': 'RegionOne'}, {'relationship-key': 'tenant.tenant-id', 'relationship-value': 'f1b664a504b34807a39013c0805b0c91'}]}]}, 'service-type': 'vFW'}, {'relationship-list': {'relationship': [{'related-to': 'tenant', 'relationship-data': [{'relationship-key': 'cloud-region.cloud-owner', 'relationship-value': 'Rackspace'}, {'relationship-key': 'cloud-region.cloud-region-id', 'relationship-value': 'RegionOne'}, {'relationship-key': 'tenant.tenant-id', 'relationship-value': 'f1b664a504b34807a39013c0805b0c91'}]}]}, 'service-type': 'vLB'}]}, 'subscriber-name': 'Demonstration', 'subscriber-type': 'INFRA'} ] [1] https://wiki.onap.org/display/DW/Run+demo.sh+on+vanilla+Openstack<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Run-2Bdemo.sh-2Bon-2Bvanilla-2BOpenstack&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY&m=2m_UW6AwfZ0bC8OF0JScVHZTHa7L4AzUlX6zku4rEBA&s=qZHeL5rndAY68-kcOFwlViL-2_zeeI3XwnxHOyOTJlI&e=> -- Regards, Subhash Kumar Singh ________________________________ From: Gaurav Gupta (c) [[email protected]] Sent: Friday, June 16, 2017 21:37 To: ROSE, DANIEL V; Subhash Kumar Singh; [email protected]<mailto:[email protected]> Cc: Kanagaraj Manickam Subject: Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Subhash These IP Address you will mention in the onap configuration files . To check which application is holding these ip address . you can login to each docker container and check netstat -tunlp | grep ipaddress -- you should see some application running on those ip address and on specific port . thanks Gaurav ________________________________ From: ROSE, DANIEL V <[email protected]<mailto:[email protected]>> Sent: 16 June 2017 21:14 To: Subhash Kumar Singh; Gaurav Gupta (c); [email protected]<mailto:[email protected]> Cc: Kanagaraj Manickam Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer I believe MSO supports keystone 3, so you can use onap except for dcae, but Robot does not currently support keystone v3 so the demo scripts will not work. Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: Subhash Kumar Singh [mailto:[email protected]] Sent: Friday, June 16, 2017 8:17 AM To: ROSE, DANIEL V <[email protected]<mailto:[email protected]>>; Gaurav Gupta (c) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Cc: Kanagaraj Manickam <[email protected]<mailto:[email protected]>> Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Hello Daniel and Gaurav, Daniel, Yes, we are using the using keystone 3 (OS_IDENTITY_API_VERSION=3). Could you please let us know, if it is possible to proceed further with keystone v3. Gaurav, Could you please let us know how the DCAE uses these allocated 5 IPs. -- Regards, Subhash Kumar Singh ________________________________ From: ROSE, DANIEL V [[email protected]] Sent: Thursday, June 15, 2017 22:48 To: Gaurav Gupta (c); Subhash Kumar Singh; [email protected]<mailto:[email protected]> Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Also that error means that you are using keystone 3 I believe. Daniel Rose ECOMP / ONAP com.att.ecomp 732-420-7308 From: [email protected]<mailto:[email protected]>[mailto:[email protected]] On Behalf Of Gaurav Gupta (c) Sent: Thursday, June 15, 2017 10:50 AM To: Subhash Kumar Singh <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Subhash Can you try fixing the ete.sh health first . The health check For DCAE fails because the data collection and analytics platform that DCAE controller spins up off the Heat template is not there. Please pull the latest templates from Gerrit (onap_openstack_float.* is the right one). In order for DCAE to work correctly, at this time, you need to manually assign 5 floating IPs to your OpenStack project. This 5 IPs need to be associated to: dcae_coll_float_ip dcae_db_float_ip dcae_hdp1_float_ip dcae_hdp2_float_ip dcae_hdp3_float_ip in whatever order you want. At run time, the DCAE controller will fetch those IPs from the underlying OpenStack platform and assign to the VMs defined above. To assign floating IPs to your project, from the OpenStack horizon dashboard, click on Compute -> Access & Security -> Floating IPs. Then click “Allocate IP To Project” 5 times. OpenStack will assign 5 IPs to you. I will update the wiki page soon https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_ONAP-2BInstallation-2Bin-2BVanilla-2BOpenStack&d=DwMGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI&m=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs&s=8ZSFZ8NzhjRZqQVQ6hUFSbtAv3zrNu4s6ys6p-TuyKQ&e=>and send an email when done. Note, however, that DCAE team is still working on a DNS issue within the DCAE collector docker container. The issue is tracked in this Jira: https://jira.onap.org/browse/DCAE-7<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAE-2D7&d=DwMGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI&m=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs&s=OX51a2fmXvVRJHuK36u2NwrA3eCXCkJBgzQdqgBk9_E&e=> Thanks Gaurav ________________________________ From: [email protected]<mailto:[email protected]><[email protected]<mailto:[email protected]>> on behalf of Subhash Kumar Singh <[email protected]<mailto:[email protected]>> Sent: 15 June 2017 19:50 To: [email protected]<mailto:[email protected]> Subject: [onap-discuss] Robot VM Demo.sh is failing to initialize customer Hello Everyone, We are attempting execute 'init_customer' to pre-populate A&AI but we the robot test cases (demo.sh) are failing. At the same time, we can see the healthcheck (ete.sh) is passing after adding some changes to bring up the docker services (https://gerrit.onap.org/r/#/c/5009/<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_-23_c_5009_&d=DwMF-g&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=nK_7CmLjD9kdXAxXtrWN8ABAcK9zsrACqc_sl97MXxc&s=D0zGvcXY9Pv9ns6GBkIcdn7ff_Y7Uqs5xTN4N-K5km4&e=>). Following are the logs from robot vm: $ ./demo.sh init_customer Starting Xvfb on display :89 with res 1280x1024x24 Executing robot tests at log level TRACE ============================================================================== OpenECOMP ETE ============================================================================== OpenECOMP ETE.Robot ============================================================================== OpenECOMP ETE.Robot.Testsuites ============================================================================== OpenECOMP ETE.Robot.Testsuites.Demo :: Executes the VNF Orchestration Test ... ============================================================================== Initialize Customer | FAIL | KeyError: 'tenant' ------------------------------------------------------------------------------ OpenECOMP ETE.Robot.Testsuites.Demo :: Executes the VNF Orchestrat... | FAIL | 1 critical test, 0 passed, 1 failed 1 test total, 0 passed, 1 failed ============================================================================== OpenECOMP ETE.Robot.Testsuites | FAIL | 1 critical test, 0 passed, 1 failed 1 test total, 0 passed, 1 failed ============================================================================== OpenECOMP ETE.Robot | FAIL | 1 critical test, 0 passed, 1 failed 1 test total, 0 passed, 1 failed ============================================================================== OpenECOMP ETE | FAIL | 1 critical test, 0 passed, 1 failed 1 test total, 0 passed, 1 failed ============================================================================== $ ./ete.sh health ============================================================================== OpenECOMP ETE ============================================================================== OpenECOMP ETE.Robot ============================================================================== OpenECOMP ETE.Robot.Testsuites ============================================================================== OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp components are... ============================================================================== Basic DCAE Health Check | FAIL | Value of dictionary key 'healthTestStatus' does not match: YELLOW != GREEN ------------------------------------------------------------------------------ Basic SDNGC Health Check | PASS | ------------------------------------------------------------------------------ Basic A&AI Health Check /var/opt/OpenECOMP_ETE/robot/library/urllib3/connectionpool.py:852: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.io/en/latest/advanced-usage.html#ssl-warnings<https://urldefense.proofpoint.com/v2/url?u=https-3A__urllib3.readthedocs.io_en_latest_advanced-2Dusage.html-23ssl-2Dwarnings&d=DwMF-g&c=LFYZ-o9_HUMeMTSQicvjIg&r=2wwdGZ3YcpSivQ2Kio028A&m=nK_7CmLjD9kdXAxXtrWN8ABAcK9zsrACqc_sl97MXxc&s=B2IcBpUryMx7eDk-Nmb7ftyCEUkw6m4ep01a2kfyXCQ&e=> InsecureRequestWarning) | PASS | ------------------------------------------------------------------------------ Basic Policy Health Check | PASS | ------------------------------------------------------------------------------ Basic MSO Health Check | PASS | ------------------------------------------------------------------------------ Basic ASDC Health Check | PASS | ------------------------------------------------------------------------------ Basic APPC Health Check | PASS | ------------------------------------------------------------------------------ Basic Portal Health Check | PASS | ------------------------------------------------------------------------------ Basic Message Router Health Check | PASS | ------------------------------------------------------------------------------ Basic VID Health Check | PASS | ------------------------------------------------------------------------------ OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp compo... | FAIL | 10 critical tests, 9 passed, 1 failed 10 tests total, 9 passed, 1 failed ============================================================================== OpenECOMP ETE.Robot.Testsuites | FAIL | 10 critical tests, 9 passed, 1 failed 10 tests total, 9 passed, 1 failed ============================================================================== OpenECOMP ETE.Robot | FAIL | 10 critical tests, 9 passed, 1 failed 10 tests total, 9 passed, 1 failed ============================================================================== OpenECOMP ETE | FAIL | 10 critical tests, 9 passed, 1 failed 10 tests total, 9 passed, 1 failed ============================================================================== Output: /share/logs/ETE_20981/output.xml Log: /share/logs/ETE_20981/log.html Report: /share/logs/ETE_20981/report.html Kindly help to pass through this step. -- Regards, Subhash Kumar Singh This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amdocs.com_about_email-2Ddisclaimer&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY&m=2m_UW6AwfZ0bC8OF0JScVHZTHa7L4AzUlX6zku4rEBA&s=6PWIQLPksSnOS6LWy2DUorSL_nsDj8bFQqJ_L658RA4&e=>_______________________________________________ onap-discuss mailing list [email protected]<mailto:[email protected]> https://lists.onap.org/mailman/listinfo/onap-discuss<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.onap.org_mailman_listinfo_onap-2Ddiscuss&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY&m=2m_UW6AwfZ0bC8OF0JScVHZTHa7L4AzUlX6zku4rEBA&s=k6fnpbC8gvozwVKtMAyWUtDed-v9mSnzoFgkwSgi8cw&e=>
_______________________________________________ onap-discuss mailing list [email protected] https://lists.onap.org/mailman/listinfo/onap-discuss
