Dear Jimmy, Thanks for making that fix. We have verified the changes in dev build and is working.
Regards Kanagaraj M *************************************************************************************** 本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！************************************************************************************** *************************************************************************************** This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! *************************************************************************************** From: FORSYTH, JAMES [mailto:jf2...@att.com] Sent: Wednesday, September 13, 2017 8:16 AM To: Kanagaraj Manickam; NAMBI, ARUL; onap-discuss@lists.onap.org Cc: AGGARWAL, MANISHA; BLIMKIE, STEVEN; LEE, TIAN; li.z...@zte.com.cn Subject: RE: [ESR] create VIM is failing Hi, Arul and Kanagaraj, This failure was due to a problem in the schema change in support of ESR – I have corrected them in a change I submitted: https://gerrit.onap.org/r/#/c/12067/ thanks, jimmy From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kanagaraj Manickam Sent: Monday, September 11, 2017 9:57 AM To: NAMBI, ARUL <arul.na...@amdocs.com<mailto:arul.na...@amdocs.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] [ESR] create VIM is failing Hi Arul, We are having the ha proxy in our dev setup and using the aai resources directly though. Also just to confirm, we tested the REST API reported below over ha-proxy and no difference found. Regards Kanagaraj M *************************************************************************************** 本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！************************************************************************************** *************************************************************************************** This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! *************************************************************************************** From: Arul Nambi [mailto:arul.na...@amdocs.com] Sent: Monday, September 11, 2017 7:24 PM To: Kanagaraj Manickam; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [ESR] create VIM is failing Hi Kanagaraj, I think you will still need a ha proxy even in dev mode. In the instructions on how to set up AAI https://wiki.onap.org/pages/viewpage.action?pageId=10782088<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_pages_viewpage.action-3FpageId-3D10782088&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=Oej6QUk5p2KdqNEWySpOHA&m=SvG3sUoviawLmo8d5FNxP248QYCUX55jUs-r6HfCGAI&s=4DsdvlW_IC8Z27m8nvGqSt4jSyZRVqzWt3fRVsLYQm8&e=> step 3 is installing haproxy. Are you having a different kind of setup? Regards Arul From: Kanagaraj Manickam [mailto:kanagaraj.manic...@huawei.com] Sent: Monday, September 11, 2017 1:23 AM To: Arul Nambi <arul.na...@amdocs.com<mailto:arul.na...@amdocs.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [ESR] create VIM is failing Hi Arul, Because we are using the AAI in dev mode, tried to avoid the ha proxy. Please let us know if it will make any difference? Thanks. Regards Kanagaraj M *************************************************************************************** 本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！************************************************************************************** *************************************************************************************** This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! *************************************************************************************** From: Arul Nambi [mailto:arul.na...@amdocs.com] Sent: Saturday, September 09, 2017 12:45 AM To: Kanagaraj Manickam; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [ESR] create VIM is failing Hi Kanagaraj, Staring from 1.1 you should be using ha proxy( running on 8443) to add your entity, but I see that you are using 8447 which points to aai-resources, is that intentional? Regards Arul From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kanagaraj Manickam Sent: Friday, September 8, 2017 5:15 AM To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: [onap-discuss] [ESR] create VIM is failing Hi Lizi, I am trying to create the VIM using below REST API and is failing. Can you please help here? Thanks. PUT on https://192.168.17.24:8447/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/cloud-1/region-1/esr-system-info-list/esr-system-info/example-esr-system-info-id-val-20232<https://urldefense.proofpoint.com/v2/url?u=https-3A__192.168.17.24-3A8447_aai_v11_cloud-2Dinfrastructure_cloud-2Dregions_cloud-2Dregion_cloud-2D1_region-2D1_esr-2Dsystem-2Dinfo-2Dlist_esr-2Dsystem-2Dinfo_example-2Desr-2Dsystem-2Dinfo-2Did-2Dval-2D20232&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=Oej6QUk5p2KdqNEWySpOHA&m=SvG3sUoviawLmo8d5FNxP248QYCUX55jUs-r6HfCGAI&s=cIxuhywxePVRyvvxRn8_BOi2ujPvuP9Cn_AAwu_ijlA&e=> with { "esr-system-info-id": "example-esr-system-info-id-val-20232", "system-name": "example-system-name-val-92940", "type": "example-type-val-33245", "vendor": "example-vendor-val-77902", "version": "example-version-val-87277", "service-url": "example-service-url-val-12527", "user-name": "example-user-name-val-60354", "password": "example-password-val-31803", "system-type": "example-system-type-val-11116", "protocal": "example-protocal-val-6365", "ssl-cacert": "example-ssl-cacert-val-58319", "ssl-insecure": true, "ip-address": "example-ip-address-val-6226", "port": "example-port-val-35849", "cloud-domain": "example-cloud-domain-val-73076", "default-tenant": "example-default-tenant-val-4344" } Response: { "requestError": { "serviceException": { "messageId": "SVC3000", "text": "Invalid input performing %1 on %2 (msg=%3) (ec=%4)", "variables": [ "PUT", "v11/cloud-infrastructure/cloud-regions/cloud-region/cloud-1/region-1/esr-system-info-list/esr-system-info/example-esr-system-info-id-val-20232", "Invalid input performing %1 on %2:uri and payload keys don't match", "ERR.5.2.3000" ] } } } Regards Kanagaraj M This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amdocs.com_about_email-2Ddisclaimer&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=Oej6QUk5p2KdqNEWySpOHA&m=SvG3sUoviawLmo8d5FNxP248QYCUX55jUs-r6HfCGAI&s=cKaJtSRW2MBYK0xjRvgOv7VYuHRemuvzwSUWLBrIa0U&e=> This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amdocs.com_about_email-2Ddisclaimer&d=DwMGaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=Oej6QUk5p2KdqNEWySpOHA&m=SvG3sUoviawLmo8d5FNxP248QYCUX55jUs-r6HfCGAI&s=cKaJtSRW2MBYK0xjRvgOv7VYuHRemuvzwSUWLBrIa0U&e=>
_______________________________________________ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
