Hi. The issue was solved by just rebooting sink VM.
Best Regards Bharath T On Wed, Feb 14, 2018 at 8:18 PM, Thiruveedula, Bharath < [email protected]> wrote: > Hi team, > > I am trying to setup closed loop using vFWCL package. I launched both > vfwsnk and vpg. But I couldn't see the packet flows in the sink graph. The > below is the screenshot from the sink portal > > [image: Inline image 1] > > If you see, the packets are being captured(3,417 captured), but only > showing 10 packets. > > I logged into Sink VM, and ran tcpdump on eth1 and eth2 interface: Please > find the logs below: > > *root@zdfw1fwl01snk01:~# tcpdump -i eth2* > *tcpdump: verbose output suppressed, use -v or -vv for full protocol > decode* > *listening on eth2, link-type EN10MB (Ethernet), capture size 262144 bytes* > *14:37:15.612245 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.618444 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.632497 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.633028 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.633882 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.637333 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > *14:37:15.641411 IP 192.168.10.200.15320 > 192.168.20.250.http-alt: UDP, > bad length 120 > 1* > > > > *root@zdfw1fwl01snk01:~# tcpdump -i eth1* > *tcpdump: verbose output suppressed, use -v or -vv for full protocol > decode* > *listening on eth1, link-type EN10MB (Ethernet), capture size 262144 bytes* > *14:39:48.313554 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > *14:39:48.319791 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > *14:39:48.333847 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > *14:39:48.335237 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > *14:39:48.338654 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > *14:39:48.342786 ARP, Request who-has 192.168.20.250 tell > is008820.domain.com <http://is008820.domain.com>, length 46* > > > And the route table has the following route too: > *192.168.10.0 192.168.20.100 255.255.255.0 UG 0 0 0 > eth0* > > I couldn't get the issue of why it is not showing up in the graphs. In > the cloud init script I got the only error in firewall and packetgen > > *./v_firewall_init.sh: line 67: > /var/lib/honeycomb/persist/context/data.json: No such file or directory* > *./v_firewall_init.sh: line 68: > /var/lib/honeycomb/persist/config/data.json: No such file or directory* > > > Please let me know if you need any logs? > > > Best Regards > Bharath T > >
_______________________________________________ onap-discuss mailing list [email protected] https://lists.onap.org/mailman/listinfo/onap-discuss
