Thanks a lot Taka for your response. Yes I am looking for CLI template support from APPC-CDT. To elaborate it in more detail -The end goal is to connect the VNF via SSH and apply the predefined configuration with set of commands.
In order to achieve this, I was looking to utilize APPC capabilities - Design time Capabilities - Onboard the VNF with CLI templates containing set of commands and the parameters require for specific configuration. Currently; APPC -CDT provides the protocol option as CLI and I hope we can define the parameter definitions and also the templates( set of commands). However; there is no tutorial to demonstrate the CLI protocol support. I have attended Scott's session but it demonstrates how Netconf can be utilized. Run time Capabilities - Invoke the APPC's Configure API to perform configuration on VNF via SSH (The username and password at the design time) . This will in turn utilize the templates( set of commands) pre-defined during design time and append the values supplied under the payload in configure request. The queries are - 1. Can we use the CDT to define parameter definition and the templates containing set of commands which VNF vendor recommends? 2. Can we define multiple templates against the same action. For e.g. for same VNF type, I may apply different configurations based on how this VNF being utilized under E2E service. 3. If answer of above query is Yes then , How these different templates can be picked up while configuration is invoked via rest API? What differential factor we could provide in the Configure request? 4. Do we have generic CLI adapter which assists to run the Command templates on VNF? Would it utilize appc-ssh-adapter? Thanks Chandrashekhar Thakare From: CHO, TAKAMUNE [mailto:[email protected]] Sent: 09 August 2018 19:35 To: [email protected]; CHO, TAKAMUNE <[email protected]>; Chandrashekhar Thakare <[email protected]> Subject: RE: [onap-discuss] [APPC]- Configuring VNF with CLI Chandrashekhar There is a link: https://wiki.onap.org/pages/viewpage.action?pageId=5734727 on 7/9, Scott had a demo for APPC/CDT. Let me know you need more help Taka From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of CHO, TAKAMUNE Sent: Thursday, August 09, 2018 9:50 AM To: [email protected]<mailto:[email protected]>; CHO, TAKAMUNE <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] [APPC]- Configuring VNF with CLI ***Security Advisory: This Message Originated Outside of AT&T *** Reference http://cso.att.com/EmailSecurity/IDSP.html for more information. Hi, Let me rephrase my answer. CDT is a self-onboard GUI for VNF. But if you are referring to use CLI template to APPC, then yes. APPC does the support. Taka From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of CHO, TAKAMUNE Sent: Thursday, August 09, 2018 8:20 AM To: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: Re: [onap-discuss] [APPC]- Configuring VNF with CLI ***Security Advisory: This Message Originated Outside of AT&T *** Reference http://cso.att.com/EmailSecurity/IDSP.html for more information. Hi, Are you referring CLI is Command-line interface? If so, then CDT does not provide any command-line interface to configure VNF. Taka From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Chandra Sent: Thursday, August 09, 2018 12:25 AM To: [email protected]<mailto:[email protected]> Subject: [onap-discuss] [APPC]- Configuring VNF with CLI Hi , Is there any tutorial available ONAP wiki how to use APPC-CDT for configuring VNF with CLI? Any information regarding this would be useful. Thanks Chandrashekhar ============================================================================================================================ Disclaimer: This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at http://www.techmahindra.com/Disclaimer.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.techmahindra.com_Disclaimer.html&d=DwMFAg&c=LFYZ-o9_HUMeMTSQicvjIg&r=i5VHNTZ3SDPgIii87sudZA&m=v9uZNHaCb7ah3MITT1ojM7MSIvROFH-kPmibcNfZNaM&s=Q3IwRsxotCScdQv53xeM4m2Wfb-BQpm82fGqKaEe6Hw&e=> externally http://tim.techmahindra.com/tim/disclaimer.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__tim.techmahindra.com_tim_disclaimer.html&d=DwMFAg&c=LFYZ-o9_HUMeMTSQicvjIg&r=i5VHNTZ3SDPgIii87sudZA&m=v9uZNHaCb7ah3MITT1ojM7MSIvROFH-kPmibcNfZNaM&s=bPyQ6lzZkbbjNun1ErIFcRhipHzhr6A7GF-KfzgUtmE&e=> internally within TechMahindra. ============================================================================================================================ -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11795): https://lists.onap.org/g/onap-discuss/message/11795 Mute This Topic: https://lists.onap.org/mt/24236496/21656 Group Owner: [email protected] Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
