Hi Steve, would you have time to have a look at our questions below?
Thanks, Martin ________________________________ Od: Klozik Martin Odesláno: úterý 16. dubna 2019 22:24 Komu: Steven Blimkie; Jimmy Forsyth; [email protected]; Klozik Martin Kopie: [email protected]; [email protected]; Puzikov Dmitry; [email protected] Předmět: Re: [onap-discuss] [CIA] AAI Alpine images testing Hi Steve, I would like to ask you, what is the expected outcome of model ingestion test and how we can debug it. So far we were able to enable "ml.debug.INGEST_SIMULATOR" in model loader profile in OOM. After deployment of AAI containers (casablanca version), the option is visible in the profile inside the model loader container. However a POST request assembled according to wiki info and sent over CURL hangs. It means, that POST request is successfully sent to model loader IP and port (values taken from output of "kubectl get svc aai-modelloader -n onap"), but no response is received. Thus I'm wondering what is an expected output and how we can debug it. Thanks, Martin ________________________________ Od: [email protected] <[email protected]> za uživatele Klozik Martin <[email protected]> Odesláno: čtvrtek 11. dubna 2019 22:20 Komu: Steven Blimkie; Jimmy Forsyth Kopie: [email protected]; [email protected]; [email protected]; Puzikov Dmitry; [email protected] Předmět: Re: [onap-discuss] [CIA] AAI Alpine images testing Thanks, we will have a look and give it a try. Martin ________________________________ Od: Steven Blimkie <[email protected]> Odesláno: čtvrtek 11. dubna 2019 22:13 Komu: Klozik Martin; Jimmy Forsyth Kopie: [email protected]; [email protected]; [email protected]; Puzikov Dmitry; [email protected] Předmět: RE: [CIA] AAI Alpine images testing You could do it that way. I think you can also delete the kubernetes configmap and recreate it with the values you want without rebuilding and deploying the helm charts. I haven’t done it before, but in theory you should be able to delete the model-loader’s configmap, recreated it with the new values, and then restart the model-loader pod. I haven’t done it before, but based on the k8s docs it seems like that is supported… https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/ From: Klozik Martin <[email protected]> Sent: Thursday, April 11, 2019 3:49 PM To: Steven Blimkie <[email protected]>; Jimmy Forsyth <[email protected]> Cc: [email protected]; [email protected]; [email protected]; Puzikov Dmitry <[email protected]>; [email protected] Subject: Re: [CIA] AAI Alpine images testing Hi Steven, thank you for preparing wiki instructions. Just to make sure, that we understand correctly the first step, i.e "Enable the debug API on the model-loader service": * we should add "ml.debug.INGEST_SIMULATOR=enabled" into model-loader profile at OOM, i.e. file oom/kubernetes/aai/charts/aai-modelloader/resources/config/model-loader.properties * after that AAI helm chart must be rebuilt and re-installed as per instructions at https://wiki.onap.org/display/DW/Using+AAI+in+Openlab, in order to enable INGEST_SIMULATOR in aai model-loader container Do we got it correctly? Thanks, Martin ________________________________ Od: Steven Blimkie <[email protected]<mailto:[email protected]>> Odesláno: středa 10. dubna 2019 21:31 Komu: Klozik Martin; Jimmy Forsyth Kopie: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; Puzikov Dmitry; [email protected]<mailto:[email protected]> Předmět: RE: [CIA] AAI Alpine images testing I’ve added the instructions to test the model-ingestion flow to the wiki … https://wiki.onap.org/display/DW/Testing+Model+Ingestion Jimmy: Feel free to move that page around if you think it belongs somewhere else in the topic hierarchy. Steve From: Klozik Martin <[email protected]<mailto:[email protected]>> Sent: Wednesday, April 10, 2019 12:05 PM To: Jimmy Forsyth <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]>; Steven Blimkie <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; Puzikov Dmitry <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: [CIA] AAI Alpine images testing Hi Jimmy, Steven and Harish, thank you once again for attending our CIA meeting on Friday and your inputs to the testing of minimized AAI docker images. In the meantime, we were granted an access to AAI windriver lab. It means, that we are able to reach Windriver OpenStack UI and spawn VMs. The question is, how to proceed further with AAI testing effectively. According to the following wiki page https://wiki.onap.org/display/DW/Using+AAI+in+Openlab Using AAI in Openlab - Developer Wiki - Confluence<https://wiki.onap.org/display/DW/Using+AAI+in+Openlab> AAI has a single instance of ONAP in the "A & AI" project in the windriver lab. Once you are connected to the openlab via openvpn, use ssh to connect to to the AAI rancher server as user 'ubuntu' wiki.onap.org There should be an ONAP instance running at your lab, which would be perfect for testing of modified AAI images. However I'm not sure if this page is still valid. I'm able to ping Rancher server IP 10.12.6.205, but it doesn't respond to requests neither on ssh nor Rancher UI (8080) ports. I suppose, that this testing environment shall be deployed by "onap-oom" stack. This stack has been deployed 10 months ago, but when I've performed its check, I can see that several key components are not available anymore. Is this environment still available and suitable for our testing? If so, is there any updated information how to use it and where an access key can be obtained? In case that environment above is not available, what is the right way to proceed? Do we have to install k8s cluster manually or is there any tooling available (e.g at Windriver LAB itself or some scripts developed/used by your team) to speed up and simplify AAI deployment? During the meeting it was mentioned, that Steve will document necessary test steps at the wiki. Is this test description already available or is it a completely new page which has to be written yet? Any details about necessary test steps, involved ONAP components/docker images will be welcomed. Please advise, Martin This email and the information contained herein is proprietary and confidential and subject to the Amdocs Email Terms of Service, which you may review at https://www.amdocs.com/about/email-terms-of-service This email and the information contained herein is proprietary and confidential and subject to the Amdocs Email Terms of Service, which you may review at https://www.amdocs.com/about/email-terms-of-service -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#16987): https://lists.onap.org/g/onap-discuss/message/16987 Mute This Topic: https://lists.onap.org/mt/31020624/21656 Group Owner: [email protected] Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
