jose manuel,
la varilla receptora no ha de ser larga para evitar que los
transistores se saturen. He leido que se ha llegado a usar
la propia caja envolvente metalica como antena.
Tambien se ha de montar alejada de fuentes de ruido...
si la montas, me gustaria conocer tus resultados.
salud
eduardo
---------- Forwarded message ----------
From: Alberto di Bene < [EMAIL PROTECTED]>
Date: Feb 7, 2006 1:43 AM
Subject: LF: Re: Mini Whip and local noise
To: [EMAIL PROTECTED]
I have simulated the mini whip with PSpice, and the results are quite
good.
In the schematic below, the V3 source and the 10pF capacitor simulate
the whip itself. Total current from the power supply is abt 50mA, of which
38 flow in the 2N5109 and 12 in the J310.
The Bode plot shows the frequency response of the output referred to
the V3 source signal. The vertical scale are dB. The second Bode plot is
just the LF section expanded.
I have one almost built and in the next days it will find its way toward
a chimney on my roof...
73 Alberto I2PHD
In the schematic below, the V3 source and the 10pF capacitor simulate
the whip itself. Total current from the power supply is abt 50mA, of which
38 flow in the 2N5109 and 12 in the J310.
The Bode plot shows the frequency response of the output referred to
the V3 source signal. The vertical scale are dB. The second Bode plot is
just the LF section expanded.
I have one almost built and in the next days it will find its way toward
a chimney on my roof...
73 Alberto I2PHD
SPONSORED LINKS
| Electrical engineering degree online | Electrical engineering degree | Electrical engineering |
| Electrical engineering course | Electrical engineering graduate school | Online electrical engineering course |
YAHOO! GROUPS LINKS
- Visit your group "ondalarga" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
