Hi Rushan, It looks like there is a problem in your phone. Whenever two codecs are used, than you face the problem. If only one codec is defined, than it works ok.
Playing ring on getting call ring signal, is the end point task. The asterisk-driver has to send ALERTING signal to end point. And the end-point has to play the ring tone. Regards, Avin Patel Objective Systems, Inc. > -----Original Message----- > From: Rushan Sobar [mailto:[EMAIL PROTECTED] > Sent: Sunday, April 16, 2006 8:12 PM > To: Rushan Sobar; ooh323c-devel@lists.sourceforge.net > Subject: [ooh323c-devel] Re: asterisk-ooh323c-0.5 > > > also i find out something... using 0.5 on the ooh323 debug > > Adding capabilities to call(outgoing, ooh323c_o_2) > Adding g729A capability to call(outgoing, ooh323c_o_2) > Adding g729 capability to call(outgoing, ooh323c_o_2) > > call ring but no ring tone in speakers...... degrade back to 0.2 and type > ooh323 debug it shows > > Adding capabilities to call(outgoing, ooh323c_o_2) > Adding g729A capability to call(outgoing, ooh323c_o_2) > > ringing tone in speaker work find now.... i guess Adding g729 with g729A > capability to call in 0.5 cause the problem.... coz 0.2 just send g729A > capability > and i guess its the same to what happen when adding g729 and g723 > ... ooh323 > somehow mix with the 2 codecs when adding capability to call as i > mentioned > in my email yesterday..... > > Anyhelp???? > > > ----- Original Message ----- > From: "Rushan Sobar" <[EMAIL PROTECTED]> > To: <ooh323c-devel@lists.sourceforge.net> > Sent: Saturday, April 15, 2006 12:01 PM > Subject: asterisk-ooh323c-0.5 > > > > Hi, > > > > i setup a trunk with ooh323 ,,, all working smooth and fine, > > but im facing one problem.... > > > > using ooh323 with only allow = g729 in ooh323.conf work smooth on g729 > > phone > > using ooh323 with only allow = g723.1 in ooh323.conf work > smooth on g723.1 > > softphone > > > > when allow both g729 and g723.1 in the ooh323.conf one of the > phones g729 > > or g723.1 drop the call on pickup depend on which codec allow > 1st in the > > config. > > > > im not able to make both codecs to work at same time for g729 phone and > > g723.1 phone > > > > anyhelp ???? anyway to let my g723.1 and g729 phones work with ooh323 ? > > > > -- > This message has been scanned for viruses and > dangerous content by MEC E-Mail Scanner, and is > believed to be clean. > -- > www.mec.com.jo > > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking > scripting language > that extends applications into web and mobile media. Attend the > live webcast > and join the prime developer group breaking into this new coding > territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > ooh323c-devel mailing list > ooh323c-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ooh323c-devel > > ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ ooh323c-devel mailing list ooh323c-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ooh323c-devel
