On 08/21/2012 09:08 PM, dongjun zong wrote:
Andrew,
I think you are right, I add a sleep time after insert page number
field before getText, the page number can get correct.
But I think it's a bug for page number update issue.
Have you tried forcing an update? If so, then you won't need to wait.
I expect that an update may be a time consuming operation (say if you
insert at page number 400, and it must refresh from the start). I once saw
a problem where a document would open, but the initial page numbers were
wrong. It took a while for the page numbers to be updated after the
document loaded. The final solution was to issue a full refresh, which took
time, but made it happen. So, the trade off was to allow the user to
immediately see and edit the document rather than forcing them to wait for
the refresh to occur on load. With a large document, this can take time.
My guess is that it takes significantly more time to create and insert a
field than to trigger the update process. When the API is used to insert,
we have no context on the operation so it seems reasonable to not make an
immediate update before return. If the update process takes 1000 times
longer to occur (probably depends on document size and other factors,
depending on what is updated), then if I want to insert 100 fields, what
might have taken a fraction of a second may now take minutes.
Commands triggered from the GUI can make the reasonable assumption that
the user is not likely to perform that task a 100 times, and that a user is
sitting right there and probably desires an immediate response to the
command, so then the triggered code (a dispatch) includes the update task
as part of the process.
If you think that not updating the single field immediately is a bug, you
should try inserting a Table Of Contents (TOC).
So, although you are certain that it is a bug, and you may be right, I
might call it a design decision that tends to make the typical user
experience more performant; which is the usual case..... but this is mostly
speculation on my part.
Oliver, I have tired again, on my computer, if don't add sleep time, it
has problem for exist more than 2 page sample fie. You can try this sample,
add a page nubmer at end of this document. pls get this sample from
attachement.
2012/8/21 Andrew Douglas Pitonyak <[email protected] <mailto:
[email protected]>>
My expectation is that this is not a bug.
I think that this is probably a timing problem based on the speed
of the computer, the size of the document, how busy your CPU is,
etc. If you do not have a number, then the values have probably
not updated yet. Remember that the data model has no idea what
page number it really is. This value must be updated by the view
model / current controller (or something similar). If you have a
value, then it just so happens that the values updated
immediately. If you insert the value using the GUI, that code is
smart enough to then trigger the update before it returns.
On 08/21/2012 03:23 AM, dongjun zong wrote:
The strange thing is this API can works fine for doc sample
file. I guess
this is a bug.
2012/8/21 Andrew Douglas Pitonyak <[email protected]
<mailto:[email protected]>>
OK, I had to look...
For a text field, see if you can call update. This may not
work if the
document has not finished repaginating. I have heard of
cases where a
document had not finished doing that before someone tried
to do stuff to
it. The solution was to tell the document to full refresh
(probably using a
dispatch).
On 08/21/2012 02:30 AM, Andrew Douglas Pitonyak wrote:
Did you successfully insert the text field? If yes,
then after you insert
a text field, it has probably not yet refreshed its
value. Off hand, I
don't remember exactly what you need to refresh
first.... I would need to
look it up and I really need to run but figured it
might help you a bit and
you can look for the various refresh items (I think
that you can refresh
each index and for fields I think there may be a
single master field
refresh but I don't remember... have not done it in a
long time.).
On 08/20/2012 03:32 AM, dongjun zong wrote:
Hi All,
Using UNO API I do below operation.
1.Launch a odt document,
2.Create a page number field and insert into this
docment
3.Get the document text
But in the step3, page number is not contained in
the get text. But if I
launch a doc document, I can get the page number
in step 3. I think this
is
a UNO API bug, can some body help confirm? Below
is my main code pieces.
XMultiServiceFactory sevriceFactory =
(XMultiServiceFactory)
UnoRuntime.queryInterface(****
XMultiServiceFactory.class,
document);
XTextField pageNumberFiled =
(XTextField)UnoRuntime.****
queryInterface(XTextField.****class,
sevriceFactory.createInstance(****"com.sun.star.text.
**textfield.**PageNumber"));
XPropertySet props =
(XPropertySet)UnoRuntime.****
queryInterface(XPropertySet.****class,
pageNumberFiled);
props.setPropertyValue("****NumberingType", 4);//Set
page number
display as Arabic
XTextCursor xTextCursor =
document.getText().**
createTextCursor();
xTextCursor.gotoEnd(false);
document.getText().****insertTextContent(document.***
*getText().getEnd(),
pageNumberFiled, true);
String documentString =
document.getText().getString()****;
System.out.println(****documentString);
--
Andrew Pitonyak
My Macro Document:
http://www.pitonyak.org/****AndrewMacro.odt<http://www.pitonyak.org/**AndrewMacro.odt>
<http://www.**pitonyak.org/AndrewMacro.odt<http://www.pitonyak.org/AndrewMacro.odt>
Info: http://www.pitonyak.org/oo.php
-- Andrew Pitonyak
My Macro Document:
http://www.pitonyak.org/**AndrewMacro.odt<http://www.pitonyak.org/AndrewMacro.odt>
Info: http://www.pitonyak.org/oo.php
--
Andrew Pitonyak
My Macro Document:
http://www.pitonyak.org/**AndrewMacro.odt<http://www.pitonyak.org/AndrewMacro.odt>
Info: http://www.pitonyak.org/oo.php
