���-�� ����� Wed, Mar 07, 2001 at 09:32:54AM +0200 Igor Khasilev �������(�) � ���
����� � ��� ��� ���:
IK> ���-�� ����� ����� ����� ��������� ��������� � �� ����������� �������.
IK> ��� ��������. ����������, ��������� �������� ��������� ���-��
IK> ����������� ���������� From.
����. ��������������
����� ��� ����� ���������
IK> � �� ����: ��, �����������. ���� �ӣ ����� ��, �� � ������� �������� �������
IK> ����� wccp2. � ���� ������ ������� - ��� ���������� wccp, ��������
IK> ���������� (��������) ���� ������� ����������� � wccp, - ��� ����� �����
IK> �������� ������ ����������������, ���� � ������� ���� ������ ��� ����� ���
IK> ����������.
cisco:
chesheer#sh conf | include wccp
....
ip wccp version 1
ip wccp web-cache redirect-list 100
....
in se x/x
....
ip wccp web-cache redirect out
....
chesheer#sh ip wccp
Global WCCP information:
Router information:
Router Identifier: 212.26.128.40
Protocol Version: 1.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 12336589
Redirect access-list: 100
Total Packets Denied Redirect: 27403443
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
squid:
# TAG: wccp_router
# Use this option to define your WCCP ``home'' router for
# Squid. Setting the 'wccp_router' to 0.0.0.0 (the default)
# disables WCCP.
wccp_router 212.26.128.209
# HTTPD-ACCELERATOR OPTIONS
# -----------------------------------------------------------------------------
# TAG: httpd_accel_host
# TAG: httpd_accel_port
# If you want to run Squid as an httpd accelerator, define the
# host name and port number where the real HTTP server is.
#
# If you want virtual host support then specify the hostname
# as "virtual".
#
# NOTE: enabling httpd_accel_host disables proxy-caching and
# ICP. If you want these features enabled also, then set
# the 'httpd_accel_with_proxy' option.
#
httpd_accel_host virtual
#httpd_accel_port port
# TAG: httpd_accel_with_proxy on|off
# If you want to use Squid as both a local httpd accelerator
# and as a proxy, change this to 'on'.
#
httpd_accel_with_proxy on
# TAG: httpd_accel_uses_host_header on|off
# HTTP/1.1 requests include a Host: header which is basically
# the
# hostname from the URL. Squid can be an accelerator for
# different HTTP servers by looking at this header. However,
# Squid does NOT check the value of the Host header, so it opens
# a big security hole. We recommend that this option remain
# disabled unless you are sure of what you are doing.
#
# However, you will need to enable this option if you run Squid
# as a transparent proxy. Otherwise, virtual servers which
# require the Host: header will not be properly cached.
httpd_accel_uses_host_header on
�� � redirect ����� ipchains 80/tcp --> 3128/tcp
������ �������� ����� ��������� ������ ip_wccp, �� � ����� �
����������� ��������� �� 2.4.x ��������� ������������� � gre tunnel
��� �������� linux 2.4.2ac6 � cisco ��������� ������ ���� ����� gre -
��� ���� ����� ��������
���� � 2.4.x ����� ����������� �� ���-�� ���������, � ���-�� ������
����������� ����� sysctl (�� ��������� 16384)
������� ������, � squid 2.4DEVEL ��������� ���� ����� �������������
����� � netfilter - �.�. ����� ����������� ����
����� �� ��� �������� � oops?
____________________________________________________________________
Info&Contacts -- RIPE: MAGE-RIPE, InterNic: AT2963, ICQ: 18035130
PGP: ftp://blackhole.adamant.net/pgp/mykey.pgp.asc
������� ����� ����� �����. �� ��� ��� ���� ��� ��� �� ��� ��������.
=====================================================================
If you would like to unsubscribe from this list send message to
[EMAIL PROTECTED] with "unsubscribe oops" in message body.
Archive is accessible on http://www.paco.net/oops/
