JB, let's see if we can deal with this early next week, after I get
back from a business trip I just heard about. I'll need a little newbie
handholding to get onto the wiki. Tim has approved the numbering system
standard, so we're cleared to proceed.
On Tue, Jun 20, 2006 at 02:53:22PM -0400, Timothy Miller wrote:
> > Tim: if you will approve the set of standards I sent you for the
> >Traversal numbering system (A-100A1, A-100A2, A-100A3) or tell me what
> >needs
> >to be fixed before they can be approved, jb and I can take the following
> >actions:
>
> I can't say that those numbers are bad, so let's go with them.
>
> >
> >1. Start a blank number log for Traversal root numbers, probably on the
> >wiki.
> >
> >2. Fill in the root number for the OGD1 assembly, bare board, and any
> >other
> >custom parts that require Traversal drawings.
> >
> >3. Generate drawing numbers according to the numbering system standard,
> >and
> >send them to you and Howard to fill in on the title blocks.
> >
> >4. Start a blank number log for OGP standards, specifications, and other
> >official project documents.
> >
> >5. Issue the Traversal numbering system standards and post them on-line.
> >When time permits, convert them to ODF (they won't look as clean, but other
> >people besides me will be able to revise them).
> >
> >6. When I get more time, write a much smaller and simpler numbering system
> >standard for OGP documents.
>
> These sound like great ideas.
>
> > I'm pretty well buried right now, with two contract engineering
> > jobs
> >started up in the last week. So a little clerk-work supporting the
> >numbering system is about all I can contribute for the foreseeable future.
> >It's good to see the actual engineering being dealt with so effectively.
>
> Well, without your numbering system, it would eventually fall apart. :)
Remind me what drawing size the PCB schematic is, and I'll construct
a drawing number for it so you can fill in the title block. The schematic
is for the PCB and not a higher-level assembly, right?
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
