I was considering buying a small 1-2 GByte flash disk form my system so
I was looking over what was available and didn't find what I wanted.
A system based on a CompactFlash memory card is very inexpensive.
However, I find that they are slower than a hard drive :-(.
The inexpensive ones are based on the IDE/ATA interface and have a
socket for 1 CF card. It appears that not much is needed for this
interface.
I suppose that it might be relevant to know how wide the data bus on the
IDE and CF are. The IDE is 16 bit IIRC and IIUC CF flash is also 16
bit. So, it appears obvious to me that the speed could be increased by
using the PCI or PCIe interface and using several cards in parallel
(i.e. striping the data). With 32 bit PCI you could use 2 cards striped
in parallel and with 64 bit PCI you could use 4 cards striped in
parallel. It would also be possible to use 2 banks (or 2 disks) the
same as memory so that 32 bit could use 4 cards. Or, 2 disks with 2
banks each.
Since this idea is so obvious, I should probably patent it ASAP. :-D
It probably wouldn't need much besides a PCI controller to implement.
IIUC, CF cards come in different speeds and (obviously) the speed would
depend on the speed of the cards being used, but it looks like with fast
enough cards (133x?) a 64 bit PCI (or a 32 bit with 2 disks) could beat
SCII 160 or with 2 banks it could beat SCII 320.
This should considerably speed up a typical desktop Linux system if used
for swap.
Perhaps SD cards are a better idea.
--
JRT
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
