Troy Benjegerdes wrote: > > > - cost of cable drivers to support at least 2560x1600, per head. > > > > A) Displayport implemented using GTP in Spartan6.. just the price > > of the plug. The rest is IP you have to code. > > Are you much of a board guy?
Magnus Karlsson is: http://pipistrello.saanlima.com/index.php?title=Welcome_to_Pipistrello The photo shows the v1 board. He's currently doing a new revision. --8<-- Here is a list of the changes between v1 and v2. 1) The JTAG interface is changed so that the board is now supported directly by all the Xilinx tools for programming (Impact, SDK etc). 2) The Host USB circuit is removed and replaced with a PMOD connector. 3) The board now has 4 mounting holes in the corners. 4) Two more LEDs and a pushbutton switch added. I do have bare PCBs of version 1 as well as a few builts boards (two LX45 and one LX9) available for sale at cost. The LX9 board is $55 and the LX45 boards are $95 (this is my parts cost for the boards). All build boards have the same configuration (50 Mhz osc., 128 Mbit flash chip, 64 Mbyte 200 MHz DDR and all componentes except the USB host circuit mounted), the only difference is the Spartan-6 part (LX45 -3 speed grade vs. LX9 -2 speed grade). All three build boards have been tested and works great (the LX45 boards have been used for Microblaze Linux development, see http://pipistrello.saanlima.com/index.php?title=Linux_on_Pipistrello). -->8-- //Peter _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
