HI Dan,
I think that I may have offended you as you no longer respond to my mail. I'm
sorry, if I did, buti need you help. I find it extremely difficult to follw
the blogs,; its like looking for a needle in a hay stack.
In addition to the problems below, I would like some clarification on the
following problem.
I took the server to my house and can't get evergreen to run. when I run
./autogen I get the following:
[EMAIL PROTECTED]:/openils/bin$ ./autogen.sh -c /openils/conf/opensrf_core.xml
-uUpdating fieldmapper * ! EXCEPTION ! * TYPE: OpenSRF::EX::SessionMess:
Session Error Mess: [EMAIL PROTECTED]/opensrf.settings IS NOT CONNECTED TO THE
NETWORK!!!Loc.: 103 OpenSRF::Utils::SettingsClient Loc.:
/openils/lib/perl5/OpenSRF/Utils/SettingsClient.pm Time: Thu Sep 25 10:16:51
2008Updating web_fieldmapper * ! EXCEPTION ! * TYPE: OpenSRF::EX::SessionMess:
Session Error Mess: [EMAIL PROTECTED]/opensrf.settings IS NOT CONNECTED TO THE
NETWORK!!!Loc.: 103 OpenSRF::Utils::SettingsClient Loc.:
/openils/lib/perl5/OpenSRF/Utils/SettingsClient.pm Time: Thu Sep 25 10:16:52
2008Updating OrgTree * ! EXCEPTION ! * TYPE: OpenSRF::EX::SessionMess: Session
Error Mess: [EMAIL PROTECTED]/opensrf.settings IS NOT CONNECTED TO THE
NETWORK!!!Loc.: 103 OpenSRF::Utils::SettingsClient Loc.:
/openils/lib/perl5/OpenSRF/Utils/SettingsClient.pm Time: Thu Sep 25 10:16:52
2008Updating OrgTree HTML * ! EXCEPTION ! * TYPE: OpenSRF::EX::SessionMess:
Session Error Mess: [EMAIL PROTECTED]/opensrf.settings IS NOT CONNECTED TO THE
NETWORK!!!Loc.: 103 OpenSRF::Utils::SettingsClient Loc.:
/openils/lib/perl5/OpenSRF/Utils/SettingsClient.pm Time: Thu Sep 25 10:16:52
2008Refreshing proximity of org units * ! EXCEPTION ! * TYPE:
OpenSRF::EX::SessionMess: Session Error Mess: [EMAIL
PROTECTED]/opensrf.settings IS NOT CONNECTED TO THE NETWORK!!!Loc.: 103
OpenSRF::Utils::SettingsClient Loc.:
/openils/lib/perl5/OpenSRF/Utils/SettingsClient.pm Time: Thu Sep 25 10:16:53
2008
[EMAIL PROTECTED]:/openils/bin$
I kown what the problem, I just cant fix it.
Item 2> > I have been trying to set up a library structure with one
administrator, 3 staff client for circulation and cataloguing and 50 patrons. I
have used http://thomas-desktop.uwichill.edu.bb/cgi-bin/ and still can seem to
figure out how to do it. I have read your wiki but, still unclear ... A friend
was of little help.
I need you help.
Thomas
"Rebirth, renew, Starting a new Life."
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: FW: [OPEN-ILS-DEV] Installation
issues/problemsDate: Sun, 21 Sep 2008 21:21:52 +0100
This is a resent email. Thomas> From: [EMAIL PROTECTED]> To: > Subject: RE:
[OPEN-ILS-DEV] Installation issues/problems> Date: Sun, 21 Sep 2008 00:36:54
+0100> > > HI Dan,> > I have just spent the last few hours trying to figure out
what is wrong here. I installed evergreen server on a Linux box and the staff
client on a WinXP machine and all was well. When I installed the staff client
on a second machine running Vista and > > ************************************>
Item 1.> run "retest server" I get the message " the server does not support
your version of the staff client ..."> > I then began having problems accessing
http://thomas-desktop.uwichill.edu.bb/cgi-bin/ which I could do quite easily
before.> > *****************************************> > Item 2> When I run
/openils/bin/srfsh, srfsh% login admin open-ils to test the connection to
evergreen I get the following:> > [EMAIL PROTECTED]:/openils/bin$
/openils/bin/srfsh> srfsh# srfsh% login admin open-ils> ???: srfsh% login admin
open-ils> srfsh# login admin open-ils> ???: login admin open-ils> srfsh#> > I
am suppose to get some output (see Testing connection to Evergreen in teh
Installation Document).> *************************************> > Item 3> > I
re-run all the procedures which you sent me. I revisited the opensrf.xml,
opensrf_core.xml, /etc/apache2/sites-available/eg.conf. files.> > I have
reinstalled the perl module Net::Z3950::ZOOM,> > I also (as root)run this set
of commands:> rm /openils/var/web/xul/rel_1_2_3_0> rm
/openils/var/web/xul/server> make STAFF_CLIENT_BUILD_ID=rel_1_2_3_0 all> make
STAFF_CLIENT_BUILD_ID=rel_1_2_3_0 install> > the rm command woud not work as is
so I did a rm -R /openils/var/web/xul/rel_1_2_3_0 In fact, I emptied the
directory the directory /openils/var/web/xul/. The directory now looks like
this:> [EMAIL PROTECTED]:/openils/var/web/xul# ls -l> total 4> drwxr-xr-x 3
opensrf opensrf 4096 2008-09-20 18:12 rel_1_2_3_0> [EMAIL
PROTECTED]:/openils/var/web/xul#> > I could only run the "make ...all" and
"make.. install" as [EMAIL PROTECTED]:/home/opensrf/Evergreen-ILS-1.2.2.3#. I
get the following error otherwise:> > [EMAIL PROTECTED]:~# make
STAFF_CLIENT_BUILD_ID=rel_1_2_3_0 all> make: *** No rule to make target `all'.
Stop.> > ""Must this be the case?"> *******************************> Item 4> >
I also run tautogen.sh -c /openils/conf/opensrf_core.xml several times.> > I
also run
/home/opensrf/Evergreen-ILS-1.2.2.3/Open-ILS/src/support-scripts/settings-tester.pl>
and have attached the file. ( test2a.txt)>
*******************************************> > Item 5> > I have been trying to
set up a library structure with one administrator, 3 staff client for
circulation and cataloguing and 50 patrons. I have used
http://thomas-desktop.uwichill.edu.bb/cgi-bin/ and still can seem to figure out
how to do it. I have read your wiki but, still unclear ... A friend was of
little help.> ********************************> > > Item 6> > You instructed me
as follows:> > Then try logging in to the catalogue (admin / open-ils) - it
will ask> you to change your password if you're successful.> > Excuse me here,
but I can seem to see how to get this one done. It does make me feel silly.> >
> Then try logging in to the staff client (admin / whatever you changed> your
password to).> > This I had no problems with, until ... this morning>
*********************************> > Your assistance. Thank you. Can't wait.> >
Thomas> > > Thomas> > "Rebirth, renew, Starting a new Life." > > > >
_________________________________________________________________> Discover the
new Windows Vista>
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
Discover the new Windows Vista Learn more!
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
LWP::UserAgent version 2.033
XML::LibXML version 1.66
XML::LibXML::XPathContext version 1.66
XML::LibXSLT version 1.59
Net::Server::PreFork version 0.90
Cache::Memcached version 1.20
Class::DBI version 0.96
Class::DBI::AbstractSearch version 0.07
Template version 2.19
DBD::Pg version 1.49
Net::Z3950::ZOOM version 1.24
MARC::Record version 2.0.0
MARC::Charset version 1.0
MARC::File::XML version 0.88
Text::Aspell version 0.04
CGI version 3.15
DateTime::TimeZone version 0.42
DateTime version 0.35
DateTime::Format::ISO8601 version 0.06
DateTime::Format::Mail version 0.2901
Unix::Syslog version 0.100
GD::Graph3d version 0.63
JavaScript::SpiderMonkey version 0.19
Log::Log4perl version 1.10
Email::Send version 2.185
Text::CSV_XS version 0.27
Spreadsheet::WriteExcel::Big version 2.01
Tie::IxHash version 1.21
Checking Jabber connection
* Jabber successfully connected
Checking database connections
* /opensrf/default/reporter/setup :: Successfully connected to database
dbi:Pg:dbname=evergreen;host=localhost;port=5432
* Database has the expected server encoding UTF8.
* /opensrf/default/apps/open-ils.storage/app_settings/databases :: Successfully
connected to database dbi:Pg:dbname=evergreen;host=localhost;port=5432
* Database has the expected server encoding UTF8.
* /opensrf/default/apps/open-ils.cstore/app_settings :: Successfully connected
to database dbi:Pg:dbname=evergreen;host=localhost;port=5432
* Database has the expected server encoding UTF8.
* /opensrf/default/apps/open-ils.reporter-store/app_settings :: Successfully
connected to database dbi:Pg:dbname=evergreen;host=localhost;port=5432
* Database has the expected server encoding UTF8.
Checking database drivers to ensure <driver> matches <language>
* OK: Pg language is undefined for reporter base configuration
* OK: Pg language is perl in /opensrf/default/apps/open-ils.storage/language
* OK: pgsql language is C in /opensrf/default/apps/open-ils.cstore/language
* OK: pgsql language is C in
/opensrf/default/apps/open-ils.reporter-store/language
Checking libdbi and libdbi-drivers
/usr/local/lib/dbd/libdbdpgsql.so
was not linked against libdbi - you probably need to compile libdbi-drivers
from source with the --enable-libdbi configure switch.
Checking hostname
* OK: found hostname 'thomas-desktop.uwichill.edu.bb' in <hosts> section of
opensrf.xml
