Hello, I just did a quick line-by-line comparison with one of our test systems, and your log was functionally identical to ours up until the point where it ends. Is that the actual end of the log? If you grep for "ERR" in the log directory, do you find anything in any of the other logs? Your system is working well enough to request and get a "seed" value, but the second request which would return the actual authtoken fails. For reference, our log continues with:
srfsh 2010-04-07 16:19:23 [DEBG:4154:osrf_stack.c:23:] Received message from transport code from [email protected]/open-ils.auth_drone_libsysadmin-desktop_1270671563.291603_4394 srfsh 2010-04-07 16:19:23 [DEBG:4154:osrf_stack.c:50:] Transport handler received new message from [email protected]/open-ils.auth_drone_libsysadmin-desktop_1270671563.291603_4394 to [email protected]/_libsysadmin-desktop_1270670992.860239_4154 with body [{"__c":"osrfMessage","__p":{"threadTrace":"1","locale":"en-US","type":"RESULT","payload":{"__c":"osrfResult","__p":{"status":"OK","statusCode":"200","content":{"ilsevent":0,"textcode":"SUCCESS","desc":" ","pid":4394,"stacktrace":"oils_auth.c:312","payload":{"authtoken":"edd50e2c814df6476c6748c76aaccb50","authtime":420.000000}}}}}},{"__c":"osrfMessage","__p":{"threadTrace":"1","locale":"en-US","type":"STATUS","payload":{"__c":"osrfConnectStatus","__p":{"status":"Request Complete","statusCode":"205"}}}}] I am assuming you followed the steps as outlined on the "Checking for Errors" page you referenced. You may also want to run 'top' and see if any processes are stuck at 100%. If so, try killing them, do the "Checking" steps again, then see if it comes back. Please keep us up to date on anything you discover. Good luck, Dan W.
