Some of the path stuff you have to put elsewhere in the .bashrc file
on the drones. Near the top. Before it bails because you aren't in an
interactive session.
Could that be what is being missed here?
Thomas Berezansky
Merrimack Valley Library Consortium
Quoting Ben Shum <[email protected]>:
Hmm, I've never had to directly modify the brick_ctl.sh control
script or use /etc/profile as Chris describes. Only have the two
paths to the opensrf user's .bashrc.
Perhaps it's only balking that error because they don't have the
ssh-key entry setup between head and drones and so it can't locate
osrf_ctl.sh on the drones due to failure to connect.
Let us know what you discover Sue.
-- Ben
On May 10, 2011, at 6:59 AM, Sharp, Chris wrote:
Hi Sue,
I am having problems getting the brick_ctl.sh script to work. When I
issue the command it asked for the password for opensrf on the drones
and then says it cannot find osrf_ctl.sh. I put the PERL5Lib and PATH
at the beginning of .bashrc file on the drones. I have the /openils on
a NFS share from the brick head to the drones. I am running Evergreen
2_1_beta and Opensrf 2_0.Any idea what else I am missing?
For the opensrf password issue, you can take these steps (as
opensrf on the head/master server):
ssh-keygen # follow the prompts and choose not to have a passphrase
ssh-copy-id <drone IP/hostname> # substituting each actual drone
IP/hostname without brackets
As for the other issue, brick_ctl.sh has this line:
DRONE_BASE=". /etc/profile && osrf_ctl.sh -d $OSRF_PID_DIR -c $OSRF_CONFIG";
which means that it will ignore opensrf's .bashrc and source
/etc/profile instead, which means you should be able to add the
PERL5LIB and PATH lines to /etc/profile on each drone, or you could
modify brick_ctl.sh to not source /etc/profile (by removing ".
/etc/profile &&" from the DRONE_BASE line). There may be a
recommended way to do this from Bill or one of the other
developers, but those are my techniques. ;-)
Hope that's helpful!
Chris
Chris Sharp
PINES Program Manager
Georgia Public Library Service
1800 Century Place, Suite 150
Atlanta, Georgia 30345
(404) 235-7147
[email protected]
http://pines.georgialibraries.org/
Benjamin Shum
Open Source Software Coordinator
Bibliomation, Inc.
32 Crest Road
Middlebury, CT 06762
203-577-4070, ext. 113
