So the latest is I got it to work for 10 seconds and then it puked.I saw the website and the client was able to connect temporarily. Getting this error now: opensrf@localhost:~$ osrf_control --localhost --start-all Exception: OpenSRF::EX::Jabber 2015-03-07T17:59:13 OpenSRF::Transport::SlimJabber::Client /usr/local/share/perl/5.18.2/OpenSRF/Transport/SlimJabber/Client.pm:155 Jabber Exception: Could not open TCP socket to Jabber server: IO::Socket::INET: connect: Connection refused
..so hopefully someone can advise how to fix that. Maybe a /etc/hosts issue? Thanks On Sat, Mar 7, 2015 at 11:26 AM, Howard Canning <[email protected]> wrote: > *Assuming my server IP is e.g. 20.21.22.23 and my personal PC IP public > address is e.g. 50.60.70.80* > > I dont quite get the public.localhost thing. > > instructions suggest adding: > > 127.0.1.2 public.localhost public > 127.0.1.3 private.localhost private > > ...such that /etc/hosts reads: > > 127.0.0.1 localhost > 127.0.1.1 ubuntu > 127.0.1.2 public.localhost public > 127.0.1.3 private.localhost private > # The following lines are desirable for IPv6 capable hosts > ::1 localhost ip6-localhost ip6-loopback > ff02::1 ip6-allnodes > ff02::2 ip6-allrouters > > > but should I be changing this to > > 127.0.0.1 localhost > 127.0.1.1 ubuntu > 20.21.22.23 public.localhost public > 50.60.70.80 private.localhost private > # The following lines are desirable for IPv6 capable hosts > ::1 localhost ip6-localhost ip6-loopback > ff02::1 ip6-allnodes > ff02::2 ip6-allrouters > > I'm lost. > > *Regarding the below...* > > ejabberdctl register router private.localhost tempPassword123 > > > ejabberdctl register opensrf private.localhost tempPassword123 > > > ejabberdctl register router public.localhost tempPassword123 > > > ejabberdctl register opensrf public.localhost tempPassword123 > > .... > > Do I need to specify something else for public.localhost and update some > files someplace? For now I just want to get the basic install working and > see the Evergreen ILS at e.g. http://20.21.22.23 in my browser. > > > > Thanks > > > > On Sat, Mar 7, 2015 at 10:25 AM, Howard Canning <[email protected]> > wrote: > >> Hi all, >> Thanks for the replies. Ok I started afresh to reduce chances of an error >> as this is my final attempt hopefully. >> Attached is my rather OCD/methodical list of ssh commands, logs, osrf >> diagnostic and the end settings tester I use to install everything. I am >> installed on Ubuntu 14.04 on using a linode.com server. >> >> I use Putty as my SSH client and also monitor file locations using >> Filezilla. See screenshots of files in filezilla and the etc/host in Putty.. >> >> I switched out the password btw. >> >> This install actually threw no errors so I'm hopeful. >> >> I am installing: >> >> http://evergreen-ils.org/downloads/opensrf-2.4.0.tar.gz >> >> Evergreen Server >> >> http://evergreen-ils.org/downloads/Evergreen-ILS-2.7.4.tar.gz >> >> Client >> >> http://evergreen-ils.org/downloads/evergreen-setup-2.7.4.exe >> >> >> >> **** >> >> *I also get the below when I run autogen.sh (only error):* >> >> opensrf@li904-206:~$ autogen.sh >> Updating Evergreen organization tree and IDL >> >> Updating fieldmapper >> Empty filename at >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199. >> -> /openils/var/web/opac/common/js//fmall.js >> Updating web_fieldmapper >> Empty filename at >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199. >> -> /openils/var/web/opac/common/js//fmcore.js >> Updating OrgTree >> Empty filename at >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199. >> Empty filename at >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199. >> Exception: OpenSRF::EX::Session 2015-03-07T14:40:19 OpenSRF::Transport >> /usr/local/share/perl/5.18.2/OpenSRF/Transport.pm:83 Session Error: >> [email protected]/open-ils.cstore IS NOT CONNECTED TO THE >> NETWORK!!! >> >> >> ....which I expect is due to my server IP not being reflected someplace? >> >> So if my linode server is running as e.g. IP 21.22.23.24 ...where do I >> update this in the config files. >> >> I ultimately want to login to evergreen at http://21.22.23.24 >> >> In Putty "su -" switches me to root if thats ok? >> "sudo su -" asks me for the sudo password for "user" which isn't set. I >> created "user" using adduser with default settings. >> >> Thanks all for your help! >> >> >> Same attachments on dropbox if not accessible otherwise: >> https://www.dropbox.com/sh/woa0a4qib8yjtx4/AACDT2p8MdL5QUqHoJ-YoS7Ia?dl=0 >> >> >> On Sat, Mar 7, 2015 at 8:29 AM, Chris Sharp <[email protected]> >> wrote: >> >>> Hi Howard, >>> >>> ----- Original Message ----- >>> > From: "Howard Canning" <[email protected]> >>> > To: "Evergreen Discussion Group" < >>> [email protected]> >>> > Sent: Friday, March 6, 2015 9:17:30 PM >>> > Subject: Re: [OPEN-ILS-GENERAL] srfsh% login USER PASSWORD wont >>> authenticate >>> > >>> > Not having luck with installing Evergreen ILS. Attempted at least 5 >>> long >>> > comprehensive times with ubuntu 14.04 and 12.04. >>> > With Ubuntu 12.04 just now >>> > >>> > cp Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/ >>> > cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/ >>> > cp Open-ILS/examples/apache/eg_startup /etc/apache2/ >>> > >>> > actually had "in" appended to the ends in their directories...so: >>> > cp Open-ILS/examples/apache/eg.conf.in >>> /etc/apache2/sites-available/ >>> > cp Open-ILS/examples/apache/eg_vhost.conf.in /etc/apache2/ >>> > cp Open-ILS/examples/apache/eg_startup.in /etc/apache2/ >>> > >>> > and errors like: >>> > >>> > ossible unintended interpolation of @sysconfdir in string at >>> > Open-ILS/src/support-scripts/eg_db_config line 329. >>> > Possible unintended interpolation of @sysconfdir in string at >>> > Open-ILS/src/support-scripts/eg_db_config line 329. >>> > Global symbol "@sysconfdir" requires explicit package name at >>> > Open-ILS/src/support-scripts/eg_db_config line 329. >>> > Global symbol "@sysconfdir" requires explicit package name at >>> > Open-ILS/src/support-scripts/eg_db_config line 329. >>> > Execution of Open-ILS/src/support-scripts/eg_db_config aborted due to >>> > compilation errors. >>> > >>> > ************************ >>> >>> Are you copying these from the source directory from which you built and >>> installed Evergreen? The "configure/make/make install" process should be >>> substituting the actual values for @sysconfdir, etc. and creating the files >>> described in the installation README. Sounds like you either missed a step >>> or or working from more than one source directory. >>> >>> > >>> > Is there a version of OpenSRF, Evergreen, Ubuntu and client that >>> > install cleanly with a tutorial to go with. >>> > >>> > I just keep getting errors thrown despite being methodical. Apache >>> > restart issues, services not running like open-ils.auth, apparent >>> > data corruption.... >>> > >>> > My luck is out. Would love to see this working. >>> > >>> > Thanks >>> >>> If what you're after is a running Evergreen system, you might consider >>> installing from the GPLS archive: http://archive.georgialibraries.org/ >>> It's slightly behind on the version, but still in the 2.7 release family. >>> It requires a fresh install of Ubuntu 12.04. >>> >>> However, if your goal is to successfully get through the installation >>> instructions, we can help you do that too. For live help (M-F 9-5 >>> EST/EDT), use the #evergreen IRC channel ( >>> http://evergreen-ils.org/communicate/irc/ for details). Sometimes >>> people are around on the weekends too. >>> >>> -- >>> Chris Sharp >>> PINES System Administrator >>> Georgia Public Library Service >>> 1800 Century Place, Suite 150 >>> Atlanta, Georgia 30345 >>> (404) 235-7147 >>> [email protected] >>> http://pines.georgialibraries.org/ >>> >> >> >
