On Thu, 07 Feb 2008 11:05:03 -0500
Joe Landman <[EMAIL PROTECTED]> wrote:

> Update:
> [EMAIL PROTECTED] etc]# dd if=/dev/zero of=/big/local.file bs=256k 
> count=100000
> 100000+0 records in
> 100000+0 records out
> 26214400000 bytes (26 GB) copied, 58.7484 seconds, 446 MB/s
> Better. I rebuilt OFED  Are there specific recommended tuning 
> guides for iSER?  Backing store in this case are real disks, and we can 
> sink/source >750 MB/s on them, so I am not worried about disk IO 
> bottlenecks, more worried about bad config of iSCSI/iSER.
> BTW:  the 2TB LUN limit I asked about is still here in this code.  Same 
> machines (initiator and target) used for SRP reported correct LUN sizes. 
>   Here we are using the -868 open-iscsi initiator, and the tgt RPM 
> announced.  I would like to dig into this.

Thanks a lot,

I thought that I tested tgt with >2TB devices but seems that I
didn't. I'll try to fix the problem shortly.

You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi

Reply via email to