On Thu, Feb 14, 2008 at 10:28 PM, Don Williams <[EMAIL PROTECTED]>
wrote:

> What iSCSI target are you using?
>
The target machine is the following:-
 http://www.raidstore.com/RaidProductDetail.asp?ItemID=551
Its a NAS Box. The web-interface provides an interface to select which
authentication to use and etc

When i do nmap -p3260 on this machine
PORT     STATE SERVICE
3260/tcp open  unknown

its shows that 3260 port is open...


>  Are you using a packaged version of the open-iSCSI initiator or did you

iam using the packaged version of open-iscsi

>
> build it from the code on the open-iSCSI website?
>
>  You should also create an /etc/iscsi/initiatorname.iscsi

 Its already there.

>
>
>  Don
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Thursday, February 14, 2008 11:32 AM
> To: open-iscsi
> Cc: [EMAIL PROTECTED]
> Subject: Re: iscsiadm: No records found!
>
>
>
> On Feb 14, 8:22 pm, "Don Williams" <[EMAIL PROTECTED]> wrote:
> > You provided almost no information about the iSCSI target, the version
> of
> > open-iSCSI, Distro or Kernel rev.
> >
> kernel :- 2.6.22-14-generic
> OS:- Ubuntu Gutsy
> open-iscsi version:- 2.0.865-1
> >  When you run the discovery command does it find any targets?
> >
> When i run discovery command there is no output.
>
> >  One suggestion. Add :3260 to the end of the discovery command.
>
> I tried this. No result
> >  Don
> >
> Apart from this i ll show you the iscsid.conf
>
>  node.startup = automatic
> node.session.auth.authmethod = CHAP
> node.session.auth.username = xxxxxx
> node.session.auth.password = xxxxxxx
> discovery.sendtargets.auth.authmethod = CHAP
> discovery.sendtargets.auth.username = xxxxxxxx
> discovery.sendtargets.auth.password = xxxxxxx
> node.session.timeo.replacement_timeout = 120
> node.conn[0].timeo.login_timeout = 15
> node.conn[0].timeo.logout_timeout = 15
> node.conn[0].timeo.noop_out_interval = 10
> node.conn[0].timeo.noop_out_timeout = 15
>
> node.session.iscsi.InitialR2T = No
> node.session.iscsi.ImmediateData = Yes
> node.session.iscsi.FirstBurstLength = 262144
> node.session.iscsi.MaxBurstLength = 16776192
> node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072
> discovery.sendtargets.iscsi.MaxRecvDataSegmentLength = 32768
>
> When i run iscsid -f -d 8
> The following was the output
> [EMAIL PROTECTED]:/etc/iscsi# iscsid -f -d 8
> iscsid: transport class version 2.0-724. iscsid version 2.0-865
> iscsid: in ctldev_open
> iscsid: created NETLINK_ISCSI socket...
> iscsid: InitiatorName==iqn.1993-08.org.debian:01:7b3b391c825
> iscsid: an InitiatorAlias= is required, but was not found in /etc/
> iscsi/initiatorname.iscsi
> iscsid: InitiatorName=iqn.1993-08.org.debian:01:7b3b391c825
> iscsid: InitiatorAlias=venus
> iscsid: iscsid_exit
> iscsid: in ctldev_close
> iscsid: reaped pid 6626, reap_count now 0
> iscsid: poll result 1
> iscsid: poll result 1
> iscsid: poll result 1
>
> The last three lines of above output was the result of running the
> iscsiadm command for discovery.
>
>
>
> > -----Original Message-----
> > From: open-iscsi@googlegroups.com [mailto:[EMAIL PROTECTED]
> On
> >
> > Behalf Of [EMAIL PROTECTED]
> > Sent: Thursday, February 14, 2008 8:05 AM
> > To: open-iscsi
> > Subject: iscsiadm: No records found!
> >
> > Hello all,
> >
> > i have run
> > iscsiadm -m discovery -t sendtargets -p 10.129.1.71
> >
> > after this when i restart open-iscsi, its showing that no records
> > found
> > /etc/init.d/open-iscsi restart
> >
> >  * Disconnecting iSCSI
> > targets
> > [ OK ]
> >  * Stopping iSCSI initiator
> > service
> > [ OK ]
> >  * Starting iSCSI initiator service
> > iscsid
> > [ OK ]
> >  * Setting up iSCSI
> > targets
> > iscsiadm: No records found!
> >
> > [ OK ]
> >
> > Can anybody tell what could be the problem?
>
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to