Mike Christie wrote:
> Jesper Krogh wrote:
>> Hi.
>> I'm new to this iSCSI things. But the SAN I'm testing agains has 3 1GB
>> interfaces.. all put together as one "portal ip-adress".
>> I have 4 1GB interfaces in my main host. What is the preferred way of
>> making I/O at above 100MB/s in a setup like this? Bonding the NIC's under
>> linux or does the iSCSI-initiator need to get some details?
> You can also do a block level approach. If you use the current tools on 
> open-iscsi.org, then you can setup the initiator so we create a session 
> through each nic on the main host that connects to the one portal 
> ip-address on the target (see the iface info in the iscsi README). Then 
> you can use dm-multipath to round-robin over all those sessions.
> I have not done any benchmarking of dm-multipath + iscsi iface vs bonding.

Sounds interesting. Thanks a lot for the information.


You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi

Reply via email to