Hello,

I'm running ISCSI version 6.2.0.865-0.8.el5 installed from iscsi-
initiator-utils-6.2.0.865-0.8.el5 on CentOS 5 kernel 2.6.18-8.1.14.el5

I've discovered my targets, set them to autologin, set up the
autostart via "chkconfig iscsi on"

Contents of /etc/init.d
:
-rwxr-xr-x 1 root root  1375 Nov 11 20:02 iscsi
-rwxr-xr-x 1 root root  1934 Nov 11 20:02 iscsid
:
Contents of /etc/rc3.d
:
rwxrwxrwx 1 root root 17 Mar 25 01:19 S10network -> ../init.d/network
lrwxrwxrwx 1 root root 21 Oct  4 19:46 S10restorecond -> ../init.d/
restorecond
lrwxrwxrwx 1 root root 16 Oct  4 19:46 S11auditd -> ../init.d/auditd
lrwxrwxrwx 1 root root 16 Mar 24 19:34 S12syslog -> ../init.d/syslog
lrwxrwxrwx 1 root root 20 Oct  4 19:47 S13irqbalance -> ../init.d/
irqbalance
lrwxrwxrwx 1 root root 15 Mar 25 01:11 S13iscsi -> ../init.d/iscsi
:
Showing that the network should start before iscsi is loaded.

Starting the service manually with a simple "service iscsi start"
logs in and loads the iscsi drive without a problem. However whenever
I reboot the machine the drive isn't loaded. yet the iscsid daemon is
running...

[]# service iscsi status
iscsid (pid 1756 1755) is running...

trying to mount the drive gives the following error
[]# mount LABEL=sandb1
mount: special device LABEL=sandb1 does not exist

However if I restart the service with "service iscsi restart".
Everything works fine and the drive is loaded and mountable.

Checking /var/log/message , grepping for "iscsi" nets:
:
Mar 25 01:34:52 srv1 iscsid: connect failed (113)
Mar 25 01:34:56 srv1 iscsid: connect failed (113)
Mar 25 01:34:56 srv1 kernel: Loading iSCSI transport class v2.0-724.
Mar 25 01:34:56 srv1 kernel: iscsi: registered transport (tcp)
Mar 25 01:34:56 srv1 kernel: iscsi: registered transport (iser)
Mar 25 01:35:00 srv1 iscsid: connect failed (113)
Mar 25 01:35:04 srv1 iscsid: connect failed (113)
:
I'm not sure whats happening here. The network is being loaded before
iscsi so it should be able to access the target.

The fact that once I manually restart the process everything is loaded
correctly means I have iscsi configured correctly its just not
starting up properly during a reboot.

Any help would be greatly appreciated.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to