I did find out that after running the above commands, I have to run
these commands to save the automatic login variables.

iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm1 -p
192.168.0.10 --logout
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm1 -p
192.168.0.10 --logout
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm2 -p
192.168.0.10 --logout
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm3 -p
192.168.0.10 --logout
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm4 -p
192.168.0.10 --logout
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.crs -p 192.168.0.10
--logout

iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm1 -p
192.168.0.10 -l
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm2 -p
192.168.0.10 -l
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm3 -p
192.168.0.10 -l
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm4 -p
192.168.0.10 -l
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.crs -p 192.168.0.10
-l

Still doesn't create the /dev/iscsi folder, though.

On Mar 28, 9:45 am, ftyre76 <[EMAIL PROTECTED]> wrote:
> I have run the commands to attach to the openfiler and they seem to
> work correctly.  However, if I look in dev (find command) I cannot
> find any devices attached to the RAC1 machine.  I am sure this must be
> something simple, but I have never done this before.  I don't even
> have an error message to google and find a solution.  Any help would
> be much appreciated. Thanks.
>
> To make sure we are on the same page, I am trying to connect a machine
> that has Oracle Enterprise Linux 5 to an OpenFiler machine with a USB
> attached external hard drive. I am following a document to setup an
> Oracle RAC network.
>    http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html
>
> I have followed the steps up to the point of discovering and attaching
> the openfiler volumes.
>
> Thanks in advance.
>
> Here are the commands that I ran and their outputs.
>
> [EMAIL PROTECTED] ~]# iscsiadm -m discovery -t sendtargets -p openfiler-priv
> 192.168.0.10:3260,1 iqn.2006-01.com.openfiler:rac1.asm1
> 192.168.0.10:3260,1 iqn.2006-01.com.openfiler:rac1.asm2
> 192.168.0.10:3260,1 iqn.2006-01.com.openfiler:rac1.asm3
> 192.168.0.10:3260,1 iqn.2006-01.com.openfiler:rac1.asm4
> 192.168.0.10:3260,1 iqn.2006-01.com.openfiler:rac1.crs
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm1
> -p 192.168.0.10 -l
> Login session [iface: default, target: iqn.
> 2006-01.com.openfiler:rac1.asm1, portal: 192.168.0.10,3260]
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm2
> -p 192.168.0.10 -l
> Login session [iface: default, target: iqn.
> 2006-01.com.openfiler:rac1.asm2, portal: 192.168.0.10,3260]
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm3
> -p 192.168.0.10 -l
> Login session [iface: default, target: iqn.
> 2006-01.com.openfiler:rac1.asm3, portal: 192.168.0.10,3260]
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm4
> -p 192.168.0.10 -l
> Login session [iface: default, target: iqn.
> 2006-01.com.openfiler:rac1.asm4, portal: 192.168.0.10,3260]
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.crs -
> p 192.168.0.10 -l
> Login session [iface: default, target: iqn.
> 2006-01.com.openfiler:rac1.crs, portal: 192.168.0.10,3260]
> [EMAIL PROTECTED] ~]#
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm1
> -p 192.168.0.10 --op update -n node.startup -v automatic
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm2
> -p 192.168.0.10 --op update -n node.startup -v automatic
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm3
> -p 192.168.0.10 --op update -n node.startup -v automatic
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.asm4
> -p 192.168.0.10 --op update -n node.startup -v automatic
> [EMAIL PROTECTED] ~]# iscsiadm -m node -T iqn.2006-01.com.openfiler:rac1.crs -
> p 192.168.0.10 --op update -n node.startup -v automatic
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to