I have linux machine and reo1000 iscsi storage.

iscsi version: open-iscsi-2.0-865.9
reo have latest firmware version 3.1.0.39

This machine works like file server, it means it hase 2 nics, one of
them is reo connected+reiserfs on it, the other one connected to local
network (it runs samba and nfs (for test) daemons). Local network nic
is 100 megabit, connection to reo is 1Gb. Transfer speed not very big,
cause it's old machine (PIII-800), no more than 3 MB per sec in case
of smb and upto 5 in case of nfs.

If i starts writing on this or reading more than 300 MB of data, from
that machine in logs i saw:

Apr 18 11:03:29 rat kernel:  connection1:0: iscsi: detected conn error
(1011)
Apr 18 11:03:29 rat iscsid: Kernel reported iSCSI connection 1:0 error
(1011) state (3)
Apr 18 11:03:30 rat iscsid: received iferror -22
Apr 18 11:03:30 rat last message repeated 2 times
Apr 18 11:03:30 rat iscsid: connection1:0 is operational after
recovery (1 attempts)
Apr 18 11:04:43 rat kernel:  connection1:0: iscsi: detected conn error
(1011)
Apr 18 11:04:43 rat iscsid: Kernel reported iSCSI connection 1:0 error
(1011) state (3)
Apr 18 11:04:44 rat iscsid: received iferror -22
Apr 18 11:04:44 rat last message repeated 2 times
Apr 18 11:04:44 rat iscsid: connection1:0 is operational after
recovery (1 attempts)

In case of writing i can saw it more often. But file writes and reads
normally at all as i can see.

I try to find any logs in reo, but it looks like all good.

Also i try googling about "iscsid: received iferror -22" no info
about.

Some one can tell me in which direction i must investigate problem?

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to