On 24 апр, 20:37, Mike Christie <[EMAIL PROTECTED]> wrote: > Yes and no. The initiator can work fine without this setting, but it is > a feature, so it does provide some benefit. If you are using multipath > you want to set those values to non-zero, so we can detect errors in the > network and fail IO to new paths faster.
No, i'am not using multipath, old machine, only one gigabit nic on board can be installed. > I am pretty sure this is a bug in the target, because I have seen other > ones make a similar mistake. I would contact your vendor. Feel free to > refer them to me, and I can work with them to get it fixed. You mean i must send them link to this thread or you can contact them and info from me about hardware is enough? > > 2. Am i must change back: > > node.session.cmds_max = 4 > > node.session.queue_depth = 2 > > To default values 128 and 32 ? > > Changing these values and the nop ones are not related. Those values > depend on how much IO your system, network and target can support. Thank you for your time and help to me :) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to email@example.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---