Hi Mike, using the Wasabi target and the latest open-iscsi git version (as of today) I still get the errors, which are according to the Wasabi log a time out problem. It only happens when logging in, which used to take about one second or less, but now 5-10 seconds. The messages log on the initiator shows this:
scsi6 : iSCSI Initiator over TCP/IP connection1:0: detected conn error (1011) connection1:0: detected conn error (1011) connection1:0: detected conn error (1011) connection1:0: detected conn error (1011) scsi scan: 66 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device scsi 6:0:0:0: Direct-Access Wasabi WSB/iSCSI 0401 PQ: 0 ANSI: 5 sd 6:0:0:0: [sdb] 327680000 512-byte hardware sectors (167772 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 5b 00 00 08 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdb] 327680000 512-byte hardware sectors (167772 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 5b 00 00 08 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 6:0:0:0: [sdb] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg2 type 0 Albert On May 8, 11:46 pm, Mike Christie <[EMAIL PROTECTED]> wrote: > a s p a s i a wrote: > > > > >> Are you using 869 and do you also see the nop out timeout messages or do > >> you just see these connection error messages? > > > just the above connections errors... > > > 865 version: > > > [EMAIL PROTECTED] ~]# iscsiadm -V > > iscsiadm version 2.0-865 > > [EMAIL PROTECTED] ~]# iscsistart -v > > iscsistart version 2.0-865 > > [EMAIL PROTECTED] ~]# modinfo scsi_transport_iscsi > > filename: > > /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/scsi/scsi_transport_iscsi.ko > > version: 2.0-865 > > >> Yeah, read the README section 8 for how to modify the nop and replacment > >> timeout settings for iscsi root. > > > yeah ... i'll do so .. maybe adjust and see if it reappears ... > > > in searching through current /var/log/messages, seems like the errors > > only appeared twice yesterday and once this morning .. > > > no big deal, but interesting to check. > > You want to make sure you are using 2.0-865.15 if you are using the 865 > series. There was a bug in the early 865 releases where during writes we > were not tracking data right and we would or the target would drop the > session (you would see the error messages you posted about) to get us > back on track. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
