On Thu, 15 May 2008, Shrey wrote: > On May 15, 12:39 pm, Stefan de Konink <[EMAIL PROTECTED]> wrote: > > On Wed, 14 May 2008, Shrey wrote: > > > I started using/studying open-iscsi recently. I was wondering if there > > > is any hard-coded limit to number of targets devices that can > > > discovered per iSCSI target? Is there any hard-coded limit on the > > > number of LUNs supported per target device (assuming that somehow HBA > > > on iscsi target doesn't present any limit) ? > > > > It is a module parameter, check modinfo. > > Thanks :) - > defined as > ----- module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO); > ----- > and has a default value of 512. > > But is there any limit on the number of target devices that can be > discovered per iscsi target? Something like "only x targets can be > fetched using sendtarget from machine B to Machine A, each having > max_lun maximum number of LUNs" > > Thanks again for the information/help.
Mmm... I wanted to know this last week. And in the SCSI module there is written you can go up to 16k. But I suggest if you go above 4k to review the time that is needed to rescan ;) I don't know about targets, I only checked for luns :) Stefan --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
