Hello,
I just tried to run the test/regression.sh script from the open-iscsi
2.0-869.2 package on an iSCSI target (Ubuntu 2.6.24-16-xen kernel).
The regression script failed early because mkfs.ext3 could not create
a filesystem -- the open() system call reported error EBUSY. No other
process was accessing /dev/sdd. The error message still appeared after
having rebooted the initiator system. Does anyone have a hint for
analyzing this further ?
# ls -l /dev/disk/by-path/ip-192.168.64.13:3260-iscsi-iqn...:storage-lun-0
lrwxrwxrwx 1 root root 9 2008-05-23 13:25
/dev/disk/by-path/ip-192.168.64.13:3260-iscsi-iqn...:storage-lun-0 ->
../../sdd
# ./regression.sh -f /dev/sdd
mkfs.ext3 /dev/sdd1: FAILED
# strace -f mkfs.ext3 -F /dev/sdd1
...
stat("/dev/sdd1", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 49), ...}) = 0
open("/dev/sdd1", O_RDONLY|O_EXCL) = -1 EBUSY (Device or resource busy)
write(2, "/dev/sdd1 is apparently in use b"..., 46/dev/sdd1 is
apparently in use by the system; ) = 46
write(2, "will not make a filesystem here!"..., 33will not make a
filesystem here!
) = 33
exit_group(1) = ?
Bart.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
