On May 28, 2:45 pm, Konrad Rzeszutek <[EMAIL PROTECTED]> wrote:
 > I am not sure how you are partitioning your space. Does each guest
 > have an iSCSI target (or LUN) assigned to it? Or is it one big
 > drive that they run from? Also are you envisioning using this
 > with LiveMigration (or whatever it is called with your virtualization
 > system)?

I'm using Vmware-Server (not ESX, just the free one).

The guests themselves (the disk where the OS is installed) are stored as 
vmdk's on a local folder.

I want to provide application storage for each virtual machine, no 
shared storage. I have 1.6TB total capacity, and plan on giving each 
guest as much raid-5 storage space as they need.

The iscsiadm discovery on my Host reports all available targets, over 
both interfaces (broadcom and intel).

So, basicly, I have these doubts / options:

1) Login to each target on the host, and add raw disk access to the 
guests to those host-devices.
2) Don't use open-iscsi on the host, but use it on each guest to connect 
to the targets.

And the main doubt: how does link aggregation / dualpath fit into those 
Also, i find this error:

[EMAIL PROTECTED]:~# iscsiadm -m node -L all
Login session [iface: default, target: 
Login session [iface: default, target: 
portal: fe80:0000:0000:0000:021e:4fff:fe43:26c3,3260]
iscsiadm: initiator reported error (4 - encountered connection failure)
iscsiadm: Could not log into all portals. Err 107.

I'm using crossover cables.

You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi

Reply via email to