Jesse Butler wrote: > > > Erez Zilber wrote: >> On Wed, Aug 20, 2008 at 12:04 AM, Jesse Butler <[EMAIL PROTECTED]> wrote: >> >>> Ok, I've tried the configuration and login now whilst specifying the >>> TPGT. I don't hit the same error now, but I do see this: >>> >>> # iscsiadm -m node -T >>> iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346 -p >>> 10.8.0.6:3260 -l >>> Login session [iface: default, target: >>> iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346, portal: >>> 10.8.0.6,3260] >>> iscsiadm: initiator reported error (14 - iSCSI driver does not support >>> requested capability.) >>> iscsiadm: Could not execute operation on all records. Err 107. >>> >>> So, progress! >>> >>> Here is the set of operations I performed. >>> >>> Thanks >>> Jesse >>> >>> >>> # iscsiadm -m node -T >>> iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346 -p >>> 10.8.0.6:3260,1 -o new >>> New iSCSI node [tcp:[hw=default,ip=,net_if=default,iscsi_if=default] >>> 10.8.0.6,3260,1 >>> iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346] added >>> >>> # iscsiadm -m node -T >>> iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346 -p >>> 10.8.0.6:3260,1 >>> node.name = iqn.1986-03.com.sun:02:aff22998-3466-4bf4-ee3c-958fd4b5d346 >>> node.tpgt = 1 >>> node.startup = manual >>> iface.hwaddress = default >>> iface.iscsi_ifacename = default >>> iface.net_ifacename = default >>> iface.transport_name = tcp >>> node.discovery_address = <empty> >>> node.discovery_port = 0 >>> node.discovery_type = static >>> node.session.initial_cmdsn = 0 >>> node.session.initial_login_retry_max = 4 >>> node.session.cmds_max = 128 >>> node.session.queue_depth = 32 >>> node.session.auth.authmethod = None >>> node.session.auth.username = <empty> >>> node.session.auth.password = <empty> >>> node.session.auth.username_in = <empty> >>> node.session.auth.password_in = <empty> >>> node.session.timeo.replacement_timeout = 120 >>> node.session.err_timeo.abort_timeout = 10 >>> node.session.err_timeo.reset_timeout = 30 >>> node.session.iscsi.FastAbort = Yes >>> node.session.iscsi.InitialR2T = No >>> node.session.iscsi.ImmediateData = Yes >>> node.session.iscsi.FirstBurstLength = 262144 >>> node.session.iscsi.MaxBurstLength = 16776192 >>> node.session.iscsi.DefaultTime2Retain = 0 >>> node.session.iscsi.DefaultTime2Wait = 2 >>> node.session.iscsi.MaxConnections = 1 >>> node.session.iscsi.MaxOutstandingR2T = 1 >>> node.session.iscsi.ERL = 0 >>> node.conn[0].address = 10.8.0.6 >>> node.conn[0].port = 3260 >>> node.conn[0].startup = manual >>> node.conn[0].tcp.window_size = 524288 >>> node.conn[0].tcp.type_of_service = 0 >>> node.conn[0].timeo.logout_timeout = 15 >>> node.conn[0].timeo.login_timeout = 15 >>> node.conn[0].timeo.auth_timeout = 45 >>> node.conn[0].timeo.active_timeout = 5 >>> node.conn[0].timeo.idle_timeout = 60 >>> node.conn[0].timeo.ping_timeout = 5 >>> node.conn[0].timeo.noop_out_interval = 10 >>> node.conn[0].timeo.noop_out_timeout = 15 >>> node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 >>> node.conn[0].iscsi.HeaderDigest = None,CRC32C >>> >> I think that this is the problem. iSER doesn't use >> HeaderDigest/DataDigest. I strongly suggest that you use >> iscsi_discovery which does all the work for you (including setting >> HeaderDigest/DataDigest to "None"). >> >> Erez >> >> > > Hello Erez- > > The HeaderDigest setting here indicates a list of options [None, > CRC32C]. If running on iSER, we'll negotiate to "None", and all will be > well. > > I would like to take your advice, but the distribution that I am using > does not have the iscsi_discovery with the "-t" option, so I just used > static. It could be that what I'm running just won't work (we have > discussed offline a known-to-work configuration, I will try that). As > an aside, I think it's kinda nutty that there's a chance that the RHEL > 5.2 config doesn't work... since, eh, well it's ship >
I think users end up using the example in the README where the tpgt is passed in, so we did not hit the problem until recently. If you stick to the examples in there it should be fine. But yeah, slap us with fish for letting something simple slip through :( --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
