I have a dell md3000i with only a single controller in it, but it has two
iscsi ports. Each one of my servers has two iscsi nics as well. I setup two
ifaces per server and have iface0 and iface1 setup to each use their own
switch. Each switch is connected to an individual iscsi port on the md3000i
controller. Each network is on its own subnet.

I am trying for the life of me to connect a single iface to a single portal,
but I keep getting errors that no records are found. When I try to do any
type of discovery methods, it keeps adding both interfaces to both ifaces,
also seems to throw in ipv6 even though Im not using it on my network and
don't want to (how can disable ipv6). 

When I run iscsiadm -m discovery -t sendtargets -p 10.0.0.1, I get the
following:

################################################

[EMAIL PROTECTED] iscsi]# iscsiadm -m discovery -t sendtargets -p 10.0.0.1
10.0.0.1:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
10.0.0.1:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
10.0.1.1:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
10.0.1.1:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
[fe80:0000:0000:0000:021e:4fff:fe3b:58fa]:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
[fe80:0000:0000:0000:021e:4fff:fe3b:58fa]:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
[fe80:0000:0000:0000:021e:4fff:fe3b:58fc]:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4
[fe80:0000:0000:0000:021e:4fff:fe3b:58fc]:3260,1
iqn.1984-05.com.dell:powervault.6001e4f0003b58f8000000004833b5b4

###########################################################

Even though I should only be getting 1 portal for each iface and definitely
no ipv6.

What should I be doing to accomplish the task of assigning only one portal
to one iface and no ipv6 results showing in discoveries?

Looking for final results of two ifaces, 1 portal each, 1 active session
each.

Thanks,
Mark









--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to