[EMAIL PROTECTED] wrote:
> 
> 
> On Nov 20, 12:52 pm, Mike Christie <[EMAIL PROTECTED]> wrote:
>> [EMAIL PROTECTED] wrote:
>>> I've got a replacement timeout set to 86400 but after losing
>>> connection to the iscsi device it will fail typically in a minute or
>>> so:
>>> Nov 19 17:03:43 desktop kernel: connection4:0: detected conn error
>>> (1011)
>>> Nov 19 17:03:44 desktop iscsid: Kernel reported iSCSI connection 4:0
>>> error (1011) state (3)
>>> Nov 19 17:03:47 desktop iscsid: connect failed
>>> (111)
>>> Nov 19 17:04:26 desktop iscsid: connect failed
>>> (113)
>>> Nov 19 17:04:32 desktop iscsid: connect failed
>>> (113)
>>> Nov 19 17:04:39 desktop iscsid: connect failed (113)
>>> Nov 19 17:04:45 desktop iscsid: connect failed (113)
>>> Nov 19 17:04:49 desktop iscsid: connect failed (111)
>>> Nov 19 17:04:53 desktop kernel: sd 8:0:0:1: [sdd] Synchronizing SCSI
>>> cache
>>> Nov 19 17:04:53 desktop kernel: sd 8:0:0:1: [sdd] Result:
>>> hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>> Nov 19 17:04:53 desktop iscsid: conn 0 login rejected: initiator error
>>> - target not found (02/03)
>>> This is a stock fedora 9 install.  My understanding is that iscsid
>>> should continue to reconnect to the lost target for 86400 seconds
>>> before finally failing.
>> Are you using the iscsi-initiator-tools rpm in fedora 9 or are you using
>> a open-iscsi.org tarball.
>>
> 
> Currently - iscsi-initiator-utils-6.2.0.870-0.0.fc9.x86_64
> 
...

> 
> I'll contact our packager and see if he can upgrade, if not I'll just
> build a new one from source.
> 

You actually have the newest one.

Could you send the /var/log/messages output when you start the iscsi 
service? It should be something like:

Nov 20 13:26:07 max kernel: Loading iSCSI transport class v2.0-869.
Nov 20 13:26:08 max kernel: iscsi: registered transport (tcp)
Nov 20 13:26:08 max iscsid: iSCSI logger with pid=10010 started!
Nov 20 13:26:09 max iscsid: transport class version 2.0-869. iscsid 
version 2.0-870

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to