Thanks 2008/11/17 HIMANSHU <[EMAIL PROTECTED]>
> > You meant in "iscsiadm -m session -P 3",you can see the disk is > allotted? > otherwise check it.You will see here which disks are allotted for your > remote disk. > I am not an expert.I dont think there will be problem with fileio/ > blockio. > That image is existing at the same path and is not corrupted.right? > > On Nov 11, 10:22 am, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > > Recently,i use iscsi-target as the Server,and the /etc/ietd.conf > > was: > > Target iqn.2001-04.com.example:storage.disk2.sys1.xyz > > Lun 0 Path=/iso/share.img,Type=blockio > > and with open-iscsi on client,i run: > > iscsiadm -m discovery -t sendtargets -p 192.168.*:3260 > > then i can find the iqn.2001-04.com.example:storage.disk2.sys1.xyz > > , after i do "iscsiadm -m node -l",and then it shows login session, > > but when use fdisk -l,i can only find dev/sda.i can't find adding > > another disk such as /dev/sdb,why?is it because the file can't be > > edited as blockio,or something else? Thanks > > > -- Best regards FangJingjing --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---