Mike,
Here is the log information from /var/log/messages.
--------------------------------------------------------------------------------------------------------------------------------
Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started!
Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid
version 2.0-868
Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started!
Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP
Jan 27 14:03:03 rac1 kernel:   Vendor: OPNFILER  Model: VIRTUAL-
DISK      Rev: 0
Jan 27 14:03:03 rac1 kernel:   Type:   Direct-
Access                      ANSI SCSI revision: 04
Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr
sectors (537 MB)
Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off
Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write
through
Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr
sectors (537 MB)
Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off
Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write
through
Jan 27 14:03:03 rac1 iscsid: received iferror -38
Jan 27 14:03:03 rac1 last message repeated 2 times
Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now
Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/
sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt'
failed
Jan 27 14:03:13 rac1 kernel:  sda:<3>ping timeout of 5 secs expired,
last rx 47558, last ping 48808, now 50058
Jan 27 14:03:13 rac1 kernel:  connection2:0: iscsi: detected conn
error (1011)
Jan 27 14:03:14 rac1 iscsid: Kernel reported iSCSI connection 2:0
error (1011) state (3)
Jan 27 14:03:16 rac1 iscsid: received iferror -38
Jan 27 14:03:16 rac1 last message repeated 2 times
Jan 27 14:03:16 rac1 iscsid: connection2:0 is operational after
recovery (1 attempts)
Jan 27 14:03:26 rac1 kernel: ping timeout of 5 secs expired, last rx
50814, last ping 52064, now 53314
Jan 27 14:03:26 rac1 kernel:  connection2:0: iscsi: detected conn
error (1011)
Jan 27 14:03:27 rac1 iscsid: Kernel reported iSCSI connection 2:0
error (1011) state (3)
Jan 27 14:03:29 rac1 iscsid: received iferror -38
Jan 27 14:03:29 rac1 last message repeated 2 times
Jan 27 14:03:29 rac1 iscsid: connection2:0 is operational after
recovery (1 attempts)
Jan 27 14:03:39 rac1 kernel: ping timeout of 5 secs expired, last rx
54071, last ping 55321, now 56571
Jan 27 14:03:39 rac1 kernel:  connection2:0: iscsi: detected conn
error (1011)
Jan 27 14:03:40 rac1 iscsid: Kernel reported iSCSI connection 2:0
error (1011) state (3)
Jan 27 14:03:42 rac1 iscsid: received iferror -38
Jan 27 14:03:42 rac1 last message repeated 2 times
Jan 27 14:03:42 rac1 iscsid: connection2:0 is operational after
recovery (1 attempts)
Jan 27 14:03:52 rac1 kernel: ping timeout of 5 secs expired, last rx
57327, last ping 58577, now 59827
Jan 27 14:03:52 rac1 kernel:  connection2:0: iscsi: detected conn
error (1011)
Jan 27 14:03:53 rac1 iscsid: Kernel reported iSCSI connection 2:0
error (1011) state (3)
Jan 27 14:03:55 rac1 iscsid: received iferror -38
Jan 27 14:03:55 rac1 last message repeated 2 times
Jan 27 14:03:55 rac1 iscsid: connection2:0 is operational after
recovery (1 attempts)
Jan 27 14:04:05 rac1 kernel: ping timeout of 5 secs expired, last rx
60583, last ping 61833, now 63083
Jan 27 14:04:05 rac1 kernel:  connection2:0: iscsi: detected conn
error (1011)
Jan 27 14:04:06 rac1 iscsid: Kernel reported iSCSI connection 2:0
error (1011) state (3)
Jan 27 14:04:08 rac1 iscsid: received iferror -38
Jan 27 14:04:08 rac1 last message repeated 2 times
Jan 27 14:04:08 rac1 iscsid: connection2:0 is operational after
recovery (1 attempts)
------------------------------------------------------------------------------------------------------------------
Thanks
Chava

On Jan 27, 10:33 am, Mike Christie <micha...@cs.wisc.edu> wrote:
> chava45 wrote:
> > Mike,
> > iscsi: registered transport iscsi_tcp is not showing up in /var/log/
> > messages and here is the output of tail -f /var/log/messages when the
> > service iscsid start is executed
> > /var/log/messages/ output
>
> Is this in response to my question to try and make sure that we are
> starting up cleanly?
>
> So before you do "service iscsi start", do a ps -u root | grep iscsid to
> make sure it is not running. If it is running do a serivce iscsi stop.
>
> Then do a ls /sys/class/iscsi_session to make sure everything is cleaned
> up. If it is not, stop here and give me the output of the ls command and
> do a ls /sys/class/iscsi_connection.
>
> Next, if there are not sessions running start iscsid by hand.
>
> # iscsid
>
> Then run iscsiadm to check out what targets are setup
>
> # iscsiadm -m node
>
> (you should see iqn.2006-01.com.openfiler:tsn.61b3375e9b1d)
>
> Then log in by hand:
>
> # iscsiadm -m node -T iqn.2006-01.com.openfiler:tsn.61b3375e9b1d -l
>
> Then send me the logs.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to