Mike,
I have the following info as you requested:

[r...@localhost ~]# iscsid -d 8 -f
iscsid: sysfs_init: sysfs_path='/sys'

iscsid: sysfs_attr_get_value: open '/module/scsi_transport_iscsi'/'version'

iscsid: sysfs_attr_get_value: new uncached attribute
'/sys/module/scsi_transport_iscsi/version'

iscsid: sysfs_attr_get_value: add to cache
'/sys/module/scsi_transport_iscsi/version'

iscsid: sysfs_attr_get_value: cache
'/sys/module/scsi_transport_iscsi/version' with attribute value '2.0-867'

iscsid: transport class version 2.0-867. iscsid version 2.0-869
iscsid: in ctldev_open
iscsid: created NETLINK_ISCSI socket...
iscsid: InitiatorName==iqn.2005-03.org.open-iscsi:1bd5bc7d3378
iscsid: InitiatorName=iqn.2005-03.org.open-iscsi:1bd5bc7d3378
iscsid: InitiatorAlias=localhost.localdomain
iscsid: in ctldev_close
iscsid: Max file limits 1024 1024

iscsid: reaped pid 3625, reap_count now 0



[r...@localhost ~]# iscsiadm -m node -T iqn.2008-07.com.wasabi:osd.1 -p
192.168.0.90,3260
node.name = iqn.2008-07.com.wasabi:osd.1
node.tpgt = -1
node.startup = manual
iface.hwaddress = default
iface.iscsi_ifacename = default
iface.net_ifacename = default
iface.transport_name = tcp
iface.initiatorname = <empty>
node.discovery_address = 192.168.0.90
node.discovery_port = 3260
node.discovery_type = send_targets
node.session.initial_cmdsn = 0
node.session.initial_login_retry_max = 4
node.session.cmds_max = 128
node.session.queue_depth = 32
node.session.auth.authmethod = CHAP
node.session.auth.username = user0
node.session.auth.password = ********
node.session.auth.username_in = <empty>
node.session.auth.password_in = <empty>
node.session.timeo.replacement_timeout = 120
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20
node.session.err_timeo.host_reset_timeout = 60
node.session.iscsi.FastAbort = Yes
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = No
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.session.iscsi.DefaultTime2Retain = 0
node.session.iscsi.DefaultTime2Wait = 2
node.session.iscsi.MaxConnections = 1
node.session.iscsi.MaxOutstandingR2T = 1
node.session.iscsi.ERL = 0
node.conn[0].address = 192.168.0.90
node.conn[0].port = 3260
node.conn[0].startup = manual
node.conn[0].tcp.window_size = 524288
node.conn[0].tcp.type_of_service = 0
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.auth_timeout = 45
node.conn[0].timeo.noop_out_interval = 30
node.conn[0].timeo.noop_out_timeout = 30
node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072
node.conn[0].iscsi.HeaderDigest = None
node.conn[0].iscsi.DataDigest = None
node.conn[0].iscsi.IFMarker = No
node.conn[0].iscsi.OFMarker = No
[r...@localhost ~]#


The above info is with the Oneway-CHAP.
Let me know if you need any other info.

Thx, Arvind.



-----Original Message-----
From: open-iscsi@googlegroups.com [mailto:open-is...@googlegroups.com] On
Behalf Of Mike Christie
Sent: Wednesday, January 28, 2009 3:31 PM
To: open-iscsi@googlegroups.com
Subject: Re: CHAP with Open-iSCSI


Arvind Jain wrote:
> Mike, 
> I have attached the wire shark trace for OneWay-CHAP and Mutual-CHAP. I am
> not sure how helpful this is.
> 
> In case of OneWay-CHAP, Open-iscsi initiator does not continues with the
> login step and gives and error as follows:
> 
> Logging in to [iface: default, target: iqn.2008-07.com.wasabi:osd.1,
portal:
> 192.168.0.90,3260]
> iscsiadm: Could not login to [iface: default, target:
> iqn.2008-07.com.wasabi:osd.1, portal: 192.168.0.90,3260]:
> iscsiadm: initiator reported error (5 - encountered iSCSI login failure)
> Target discovery or login failed
> 

Could you give me the output of

iscsiadm -m node -T iqn.2008-07.com.wasabi:osd.1 -p 192.168.0.90,3260


And could you run iscsid by hand with debugging and give me that output 
when you try to login


# iscsid -d 8 -f &

will print it out to the console.



--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to