On 04/02/2009 06:39 PM, Mike Christie wrote:
>>
>> So I try again:
>> [] git checkout master
>> [] make user
>> [r...@testlin2] make install_user
>>
>> then I do:
>> [r...@testlin2]$ service open-iscsi start
>> Starting iSCSI initiator service:                          [  OK  ]
>> Setting up iSCSI targets: iscsiadm: No records found!      [  OK  ]
>>
>> [r...@testlin2]$ iscsiadm -m discovery -t sendtargets -p 192.168.0.142:3260 
>> --login
>> iscsiadm: InitiatorName is required on the first Login PDU
>> iscsiadm: login failed, couldn't make a login PDU
>> iscsiadm: discovery login to 192.168.0.241 failed, giving up
>>
>> [r...@testlin2]$ ps ax |grep iscsi
>> 32268 ?        S<     0:00 [iscsi_eh]
>> 32284 ?        Ss     0:00 iscsid
>> 32285 ?        S<Ls   0:00 iscsid
>> 32313 pts/0    S+     0:00 grep iscsi
>>
>> If I checkout "01123e0 Update Changelog for new release" which is 2.0-870
>> tag and do exactly like above it works, do you want that I try a bisection?
>>
> 
> 
> Not yet. Just do
> iscsiadm -m discovery -t sendtargets -p 192.168.0.142:3260 --login -d 8
> 
> and send the debug output.
> 

Hey hi that was fast here:

iscsiadm: Max file limits 1024 1024                                             
                 

iscsiadm: updating defaults from '/etc/iscsi/iscsid.conf'
iscsiadm: updated 'discovery.sendtargets.iscsi.MaxRecvDataSegmentLength', 
'32768' => '32768'
iscsiadm: updated 'node.startup', 'manual' => 'manual'
iscsiadm: updated 'node.session.timeo.replacement_timeout', '120' => '120'
iscsiadm: updated 'node.conn[0].timeo.login_timeout', '30' => '15'
iscsiadm: updated 'node.conn[0].timeo.logout_timeout', '15' => '15'
iscsiadm: updated 'node.conn[0].timeo.noop_out_interval', '5' => '5'
iscsiadm: updated 'node.conn[0].timeo.noop_out_timeout', '5' => '5'
iscsiadm: updated 'node.session.err_timeo.abort_timeout', '15' => '15'
iscsiadm: updated 'node.session.err_timeo.lu_reset_timeout', '30' => '20'
iscsiadm: updated 'node.session.initial_login_retry_max', '4' => '8'
iscsiadm: updated 'node.session.cmds_max', '128' => '128'
iscsiadm: updated 'node.session.queue_depth', '32' => '32'
iscsiadm: updated 'node.session.iscsi.InitialR2T', 'No' => 'No'
iscsiadm: updated 'node.session.iscsi.ImmediateData', 'Yes' => 'Yes'
iscsiadm: updated 'node.session.iscsi.FirstBurstLength', '262144' => '262144'
iscsiadm: updated 'node.session.iscsi.MaxBurstLength', '16776192' => '16776192'
iscsiadm: updated 'node.conn[0].iscsi.MaxRecvDataSegmentLength', '262144' => 
'131072'
iscsiadm: updated 'node.session.iscsi.FastAbort', 'Yes' => 'Yes'
iscsiadm: starting sendtargets discovery, address 192.168.0.241:3260,
iscsiadm: sendtargets discovery to 192.168.0.241:3260 using isid 0x00023d000000
iscsiadm: discovery timeouts: login 15, reopen_cnt 5, auth 45.
iscsiadm: connecting to 192.168.0.241:3260
iscsiadm: connected local port 53619 to 192.168.0.241:3260
iscsiadm: connected to discovery address 192.168.0.241
iscsiadm: discovery session to 192.168.0.241:3260 starting iSCSI login on fd 3
iscsiadm: InitiatorName is required on the first Login PDU
iscsiadm: login failed, couldn't make a login PDU
iscsiadm: discovery login to 192.168.0.241 failed, giving up
iscsiadm: disconnecting conn 0xd65040, fd 3

Not much there either

should I start from clean, naybe the old records break something.
What to do to start with totally clean setup?

Boaz

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to