Mike,
Zipped log sent.  The newer code is reporting a 1015 error on the
check response but not on the Inquiry response.
Thanks,
-Joe

On Apr 21, 1:48 pm, Mike Christie <micha...@cs.wisc.edu> wrote:
> Joer wrote:
> > Mike,
> > This the stock RHEL5.2 kernel.
>
> Could you try the kernel modules here
> ttp://www.open-iscsi.org/bits/open-iscsi-2.0-870.3.debug.tar.gz
> Just do
>
> tar -zxvf open-iscsi-2.0-870.3.debug.tar.gz
> cd open-iscsi-2.0-870.3.debug/kernel
> make
>
> service iscsi stop
> modprobe -r iscsi_tcp
> insmod scsi_transport_iscsi.ko
> insmod libiscsi.ko
> insmod iscsi_tcp.ko
>
> Then
> service iscsi start
> and retry your test.
>
> Send all the log outpout. There should be a lot.
>
>
>
> > -joe
>
> > On Apr 21, 9:18 am, Mike Christie <micha...@cs.wisc.edu> wrote:
> >> Joer wrote:
> >>> Mike,
> >>> Response in line....
> >>> On Apr 20, 5:14 pm, Mike Christie <micha...@cs.wisc.edu> wrote:
> >>>> Joer wrote:
> >>>>> A few more comments on this failure:
> >>>>> This may be a problem with how the check response is being processed
> >>>>> by the iSCSI stack...possibly due to data digest.
> >>>>> The Inquiry command goes out, the response is received with data
> >>>>> digest, and appears to be accepted.  A Test Unit Ready command then
> >>>>> goes out, response received, and 500 ms later the initiator attempts
> >>>>> to open a new connection/login.   The target then resets the original
> >>>>> TCP connection.  This is repeated several times
> >>>> Is this easy to replicated? Does it happen every time?
> >>> Yes, but only with data digest.  The cases that fail are data digest
> >>> only, header + data digest.
> >>>> Were you using the initiator that comes with RHEL 5.2 or 2.0-869.2 from
> >>>> open-iscsi.org?
> >>> I am using the initiator from open-iscsi.org.
> >> What kernel are you using? Is it a RHEL one or upstream one on RHEL?- Hide 
> >> quoted text -
>
> >> - Show quoted text -- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to