Hannes Reinecke [h...@suse.de] wrote: > mala...@us.ibm.com wrote: > > Hi all, > > I also tried installing SLES10 and SLES11. I believe they recommend > > installing on a single path and then converting to multipath. I have > > found that SLES11's initrd image can only find one path even after > > including "multipath" support into the initrd image. It creates a > > dm-multipath device with a single path and later converts to > > dm-multipath device with two paths later when it runs scripts in > > /etc/init.d. SLES10's behavior might be same, but I didn't analyse. Does > > anyone know if SLES11's initrd image can find more than one iSCSI path? > > > Yes, I do :-) > > I have patched the SUSE initrd to activate all network interfaces which > are configured via ifup in the running system. > > You'd need the attached patch to /lib/mkinitrd to achieve this.
I am using only one NIC. I have dual ported NetApp LUNs. Does the attached patch help in my case? I don't think so, but I wanted to ask anyway! Thanks, Malahal. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to email@example.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---