Hello,

problem:

I would like to use iscsi over rdma, so i have to use iser driver
(ib_iser.ko), but the ib_iser module did't want to be loaded, i have
an error during loading it with modprobe ib_iser.


error after tipping modprobe ib_iser:

FATAL: Error inserting ib_iser (/lib/modules/2.6.26-2-xen-686/kernel/
drivers/infiniband/ulp/iser/ib_iser.ko): Unknown symbol in module, or
unknown parameter (see dmesg)

dmesg:

 ib_iser: disagrees about version of symbol iscsi_conn_setup
[ 9506.567353] ib_iser: Unknown symbol iscsi_conn_setup
[ 9506.567353] ib_iser: disagrees about version of symbol
iscsi_verify_itt
[ 9506.567353] ib_iser: Unknown symbol iscsi_verify_itt
[ 9506.567353] ib_iser: disagrees about version of symbol
iscsi_session_recovery_timedout
[ 9506.567353] ib_iser: Unknown symbol iscsi_session_recovery_timedout
......

configuration:

node1:

- xen 2.6.26-2-686 kernel debian lenny
- Melanox Infiniband card MT 23108 courgar revision A1 latest firmware
3.5.00
- OFED 1.4 installed and kernel module compiled
- ipoib is working well
-
iscsi_tcp,libiscsi,scsi_transport_iscsi,sg,sd_mod,libata,aic79xx,scsi_transport_spi,
scsi_mod  iscsi module loaded.
- ib_ipoib, inet_lro, ib_ipoib, ib_ipoib, ib_sdp, rdma_cm, ib_addr,
ib_ucm, ib_sa, ib_cm, ib_uverbs, ib_umad, ib_mthca, ib_mad, ib_core,
iw_cm infiniband module loaded. But ib_iser module is not loaded.
- open-iscsi 2.0-870

node2:

- 2.6.26-2-686 kernel debian lenny
- Melanox Infiniband card MT 23108 courgar revision A1 latest firmware
3.5.00
- OFED 1.4 installed and kernel module compiled
- ipoib is working well
-
iscsi_tcp,libiscsi,scsi_transport_iscsi,sg,sd_mod,libata,aic79xx,scsi_transport_spi,
scsi_mod  iscsi module loaded.
- ib_ipoib, inet_lro, ib_ipoib, ib_ipoib, ib_sdp, rdma_cm, ib_addr,
ib_ucm, ib_sa, ib_cm, ib_uverbs, ib_umad, ib_mthca, ib_mad, ib_core,
iw_cm infiniband module loaded. But ib_iser module is not loaded.
- open-iscsi 2.0-870
-tgt (iscsi target with iser support)






--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to