Mike,

I decided to try the current repository version (as of 3PM, 7/15).  Compiled
and installed w/o issue.  Rebooted and I couldn't connect to my EQL targets.
The login process complained "no iSCSI driver".    So I installed 2.0-871
from the website tar ball.   Rebooted, same problem.  Tried an older kernel,
2.6.24-23, came up fine.   Installed (stupidly) the git version on that
kernel, reboot, couldn't log in either.  Again, trying to downgrade failed.
 Installed an even older kernel, 2.6.24-22 installed 871 from the tar ball,
that worked fine.   Removed the modified kernels and re-installed one,
2.6.24-24, then installed 871 from tar ball, works fine.
 I'm running ubuntu 8.04 LTS.  2.6.24-24-generic kernel right from ubuntu.

Is this anything you've seen?

 What I see in the log that's different is, non-working configs had these
errors.

Jul 15 15:17:56 ietd-tape kernel: [   73.760376] Loading iSCSI transport
class v2.0-871.
Jul 15 15:17:56 ietd-tape kernel: [   73.789017] iscsi_tcp: Unknown symbol
iscsi_tcp_segment_done
Jul 15 15:17:56 ietd-tape kernel: [   73.789230] iscsi_tcp: Unknown symbol
iscsi_segment_seek_sg
Jul 15 15:17:56 ietd-tape kernel: [   73.789357] iscsi_tcp: Unknown symbol
iscsi_tcp_segment_unmap
Jul 15 15:17:56 ietd-tape kernel: [   73.789771] iscsi_tcp: Unknown symbol
iscsi_tcp_hdr_recv_prep
Jul 15 15:17:56 ietd-tape kernel: [   73.789901] iscsi_tcp: Unknown symbol
iscsi_tcp_cleanup_task
Jul 15 15:17:56 ietd-tape kernel: [   73.790156] iscsi_tcp: Unknown symbol
iscsi_tcp_conn_setup
Jul 15 15:17:56 ietd-tape kernel: [   73.790445] iscsi_tcp: Unknown symbol
iscsi_tcp_r2tpool_alloc
Jul 15 15:17:56 ietd-tape kernel: [   73.790757] iscsi_tcp: Unknown symbol
iscsi_tcp_r2tpool_free
Jul 15 15:17:56 ietd-tape kernel: [   73.790953] iscsi_tcp: Unknown symbol
iscsi_tcp_task_xmit
Jul 15 15:17:56 ietd-tape kernel: [   73.791162] iscsi_tcp: Unknown symbol
iscsi_tcp_recv_skb
Jul 15 15:17:56 ietd-tape kernel: [   73.791348] iscsi_tcp: Unknown symbol
iscsi_segment_init_linear
Jul 15 15:17:56 ietd-tape kernel: [   73.791426] iscsi_tcp: Unknown symbol
iscsi_tcp_conn_get_stats
Jul 15 15:17:56 ietd-tape kernel: [   73.791502] iscsi_tcp: Unknown symbol
iscsi_tcp_task_init
Jul 15 15:17:56 ietd-tape kernel: [   73.791703] iscsi_tcp: Unknown symbol
iscsi_tcp_dgst_header
Jul 15 15:17:56 ietd-tape kernel: [   73.791788] iscsi_tcp: Unknown symbol
iscsi_tcp_conn_teardown

 The last boot up which works shows this:

Jul 15 15:46:39 ietd-tape kernel: [   65.114950] Loading iSCSI transport
class v2.0-724.
Jul 15 15:46:39 ietd-tape kernel: [   65.124429] iscsi: registered transport
(tcp)
Jul 15 15:46:39 ietd-tape kernel: [   65.189444] iscsi: registered transport
(iser)
Jul 15 15:46:39 ietd-tape kernel: [   65.555085] scsi6 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:39 ietd-tape kernel: [   65.599434] scsi7 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:39 ietd-tape kernel: [   65.603998] scsi8 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:39 ietd-tape kernel: [   65.608528] scsi9 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:39 ietd-tape kernel: [   65.613056] scsi10 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:39 ietd-tape kernel: [   65.617812] scsi11 : iSCSI Initiator
over TCP/IP
Jul 15 15:46:40 ietd-tape kernel: [   66.453071] scsi 11:0:0:0:
Direct-Access     EQLOGIC  100E-00          4.1  PQ: 0 ANSI: 5
Jul 15 15:46:40 ietd-tape kernel: [   66.453459] sd 11:0:0:0: [sdb]
2097162240 512-byte hardware sectors (1073747 MB)
Jul 15 15:46:40 ietd-tape kernel: [   66.455149] scsi 10:0:0:0:
Direct-Access     EQLOGIC  100E-00          4.1  PQ: 0 ANSI: 5
Jul 15 15:46:40 ietd-tape kernel: [   66.455757] sd 10:0:0:0: [sdc]
2097162240 512-byte hardware sectors (1073747 MB)
Jul 15 15:46:40 ietd-tape kernel: [   66.456174] sd 11:0:0:0: [sdb] Write
Protect is off
Jul 15 15:46:40 ietd-tape kernel: [   66.456659] scsi 8:0:0:0: Direct-Access
    EQLOGIC  100E-00          4.1  PQ: 0 ANSI: 5
Jul 15 15:46:40 ietd-tape kernel: [   66.457095] sd 11:0:0:0: [sdb] Write
cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 15 15:46:40 ietd-tape kernel: [   66.457262] sd 8:0:0:0: [sdd] 524298240
512-byte hardware sectors (268441 MB)
Jul 15 15:46:40 ietd-tape kernel: [   66.457926] scsi 7:0:0:0: Direct-Access
    EQLOGIC  100E-00          4.1  PQ: 0 ANSI: 5
Jul 15 15:46:40 ietd-tape kernel: [   66.458148] sd 11:0:0:0: [sdb]
2097162240 512-byte hardware sectors (1073747 MB)
Jul 15 15:46:40 ietd-tape kernel: [   66.458539] sd 10:0:0:0: [sdc] Write
Protect is off
Jul 15 15:46:40 ietd-tape kernel: [   66.458612] sd 7:0:0:0: [sde] 419450880
512-byte hardware sectors (214759 MB)
Jul 15 15:46:40 ietd-tape kernel: [   66.459105] scsi 6:0:0:0: Direct-Access
    EQLOGIC  100E-00          4.1  PQ: 0 ANSI: 5
Jul 15 15:46:40 ietd-tape kernel: [   66.461939] sd 11:0:0:0: [sdb] Write
Protect is off
Jul 15 15:46:40 ietd-tape kernel: [   66.462420] sd 8:0:0:0: [sdd] Write
Protect is off
Jul 15 15:46:40 ietd-tape kernel: [   66.462651] sd 11:0:0:0: [sdb] Write
cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 15 15:46:40 ietd-tape kernel: [   66.462660]  sdb: sdb1

# iscsiadm --version
iscsiadm version 2.0-871

I'm probably missing something obvious?

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to