Thanks for your answer!
Yes, by using "#iscsiadm -m iface -I ethN, N=1...6" we can have 6
iSCSI sessions.

But now there is the question "HOWTO assign an initiator name for EACH
session"?
For one iSCSI session it can be found in the /etc/iscsi/
initiatorname.iscsi File:

InitiatorName=iqn.1986-03.com.hp:Ethernet1

Can it be done by adding these 5 entries

InitiatorName=iqn.1986-03.com.hp:Ethernet2
InitiatorName=iqn.1986-03.com.hp:Ethernet3
InitiatorName=iqn.1986-03.com.hp:Ethernet4
InitiatorName=iqn.1986-03.com.hp:Ethernet5
InitiatorName=iqn.1986-03.com.hp:Ethernet6

or which syntax has to be used?

Rainer






On Aug 3, 10:36 pm, Donald Williams <don.e.willi...@gmail.com> wrote:
> Hello,
> I'm not sure what your question really is.  Yes, you can have 6x GbE
> interfaces on different subnets and run iSCSI over them. What target are you
> using?   Typically, your iSCSI SAN is on one subnet.  It avoids the need to
> do IP routing.   Which adds latency and can reduce performance.
>
>  -don
>
> On Fri, Jul 31, 2009 at 6:03 AM, Rainer Bläs
> <rainer.bl...@astrium.eads.net>wrote:
>
>
>
> > Dear all,
>
> > we are running a SLES 10SP2 system with 6 physical Ethernet ports.
> > For instance is it possible to have 6 iSCSI initiators onthis system
> > when each IP of these six ports are belonging to 6 different (Sub)
> > Lans?
>
> > THX, Rainer
>
> --
>
> Marie von 
> Ebner-Eschenbach<http://www.brainyquote.com/quotes/authors/m/marie_von_ebnereschenbac....>
> - "Even a stopped clock is right twice a day."

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to