I am attempting to login to a Solaris iSER target w/ a Linux machine,  
and am seeing this error:

#   iscsiadm -m node -T iqn.1986-03.com.sun:02:d8e2ebc9-6886-46dd-91f6- 
e80b7400948d -p 10.0.0.2:3260,1 -l
Logging in to [iface: default, target: iqn.1986-03.com.sun: 
02:d8e2ebc9-6886-46dd-91f6-e80b7400948d, portal: 10.0.0.2,3260]
iscsiadm: Could not login to [iface: default, target: iqn. 
1986-03.com.sun:02:d8e2ebc9-6886-46dd-91f6-e80b7400948d, portal:  
10.0.0.2,3260]:
iscsiadm: initiator reported error (5 - encountered iSCSI login failure)
#

I think I have everything configured properly (see below), so I'm just  
wondering what that "5" means so I can try to troubleshoot this.  I  
looked at the code, but it's a bit difficult to track all the way into  
the specific error codes.

My Linux Kung Fu is weak, so if version/rev info is needed, please let  
me know what and how to retrieve it.

Thanks in advance
Jesse



the initiator static config:

# cat /etc/iscsi//static/iqn.1986-03.com.sun\: 
02\:d8e2ebc9-6886-46dd-91f6-e80b7400948d\,10.0.0.2\,3260\,1\,default/ 
default
node.name = iqn.1986-03.com.sun:02:d8e2ebc9-6886-46dd-91f6-e80b7400948d
node.tpgt = 1
node.startup = manual
iface.hwaddress = default
iface.iscsi_ifacename = default
iface.net_ifacename = default
iface.transport_name = iser
node.discovery_port = 0
node.discovery_type = static
node.session.initial_cmdsn = 0
node.session.initial_login_retry_max = 4
node.session.cmds_max = 128
node.session.queue_depth = 32
node.session.auth.authmethod = None
node.session.timeo.replacement_timeout = 30
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20
node.session.err_timeo.host_reset_timeout = 60
node.session.iscsi.FastAbort = Yes
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = No
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.session.iscsi.DefaultTime2Retain = 0
node.session.iscsi.DefaultTime2Wait = 2
node.session.iscsi.MaxConnections = 1
node.session.iscsi.MaxOutstandingR2T = 1
node.session.iscsi.ERL = 0
node.conn[0].address = 10.0.0.2
node.conn[0].port = 3260
node.conn[0].startup = manual
node.conn[0].tcp.window_size = 524288
node.conn[0].tcp.type_of_service = 0
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.auth_timeout = 45
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072
node.conn[0].iscsi.HeaderDigest = None
node.conn[0].iscsi.DataDigest = None
node.conn[0].iscsi.IFMarker = No
node.conn[0].iscsi.OFMarker = No
#



--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---

Reply via email to