I did sent the ethereal trace yesterday.
I am not sure why it didn't reach, is there any place I can upload it ?
There is only 1 initiator.
# iscsiadm -m session -P 1
Target: iqn.1992-04.com.emc:cx.ckm00091100683.a3
Current Portal: 192.168.11.1:3260,2
Persistent Portal: 192.168.11.1:3260,2
**********
Interface:
**********
Iface Name: iface0
Iface Transport: tcp
Iface Initiatorname: iqn.1996-04.de.suse:02:9914ca52960
Iface IPaddress: 192.168.11.11
Iface HWaddress: 00:15:17:A8:A9:1E
Iface Netdev: eth0
SID: 10
iSCSI Connection State: TRANSPORT WAIT
iSCSI Session State: FAILED
Internal iscsid Session State: REPOEN
Target: iqn.1992-04.com.emc:cx.ckm00091100683.b3
Current Portal: 192.168.13.1:3260,4
Persistent Portal: 192.168.13.1:3260,4
**********
Interface:
**********
Iface Name: iface1
Iface Transport: tcp
Iface Initiatorname: iqn.1996-04.de.suse:02:9914ca52960
Iface IPaddress: 192.168.13.11
Iface HWaddress: 00:15:17:A8:A9:1F
Iface Netdev: eth1
SID: 11
iSCSI Connection State: TRANSPORT WAIT
iSCSI Session State: FAILED
Internal iscsid Session State: REPOEN
--- On Thu, 12/10/09, Mike Christie <[email protected]> wrote:
> From: Mike Christie <[email protected]>
> Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
> To: [email protected]
> Date: Thursday, December 10, 2009, 11:22 PM
> avora wrote:
> > Yes Mike, the recovery message is seen right away.
> >
> > Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0
> is operational after
> > recovery (1 attempts)
> >
> > 'conn error' and 'recovery' are seen one after the
> other, continuosly.
> >
>
> Do you have other initiators connected to the target?
>
> Can you get me a wireshark trace?
>
> --
>
> You received this message because you are subscribed to the
> Google Groups "open-iscsi" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/open-iscsi?hl=en.
>
>
>
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
