Hi,
This probably have been brought up before, but I couldn't find any info.
I'd like to setup multiple initiators (web/ftp cluster) to access
read-only the same iscsi target.
I would prefer to do this without cluster fs (ie GFS) if possible.
However I want to have right access on the target server locally.
I managed to do this but I have the following problem:
When I write something on the target (locally on the server)
the updates are not propagated to the initiators.
If I unmount and mount again I can see the changes.
I'm sharing /dev/vg01/iscsi which is an ext3 fs. It's locally mounted on
server
and also mounted (/dev/sde -> /mnt) on clients.
Server is centos 5.4 scsi-target-utils-0.0-6.20091205snap.el5_4.1
<target iqn.2008-09.com.example:server.target2>
backing-store /dev/vg01/iscsi
incominguser user pass
initiator-address 10.0.0.0/26
write-cache off
</target>
client is Fedora 12 iscsi-initiator-utils-6.2.0.870-10.fc12.1.x86_64
scsi22 : iSCSI Initiator over TCP/IP
scsi 22:0:0:0: RAID IET Controller 0001 PQ: 0
ANSI: 5
scsi 22:0:0:0: Attached scsi generic sg5 type 12
scsi 22:0:0:1: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0
ANSI: 5
sd 22:0:0:1: Attached scsi generic sg6 type 0
sd 22:0:0:1: [sde] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
sd 22:0:0:1: [sde] Write Protect is off
sd 22:0:0:1: [sde] Mode Sense: 79 00 00 08
sd 22:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sde: unknown partition table
sd 22:0:0:1: [sde] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
so is GFS the only option?
Giannis
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
