Hi Benjamin, I believe that I am trying to use eth4's bnx2i. I had setup eth4 for traffic but apparently I didn't have it up onboot=yes.
I rebooted the machine and actually got the iscsi device attached to /dev/sdb! Of course a /etc/init.d/iscsi restart failed it again with the following messages in /var/log/messages: Jul 16 14:40:27 qd-db-01 kernel: iscsi: registered transport (cxgb3i) Jul 16 14:40:27 qd-db-01 kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.0 (Oct 10, 2009) Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth0 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth1 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth2 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth3 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth4 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth5 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth6 Jul 16 14:40:27 qd-db-01 kernel: cnic: Added CNIC device: eth7 Jul 16 14:40:27 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.0 (Dec 06, 2009) Jul 16 14:40:27 qd-db-01 kernel: iscsi: registered transport (bnx2i) Jul 16 14:40:27 qd-db-01 kernel: scsi19 : Broadcom Offload iSCSI Initiator Jul 16 14:40:27 qd-db-01 kernel: scsi20 : Broadcom Offload iSCSI Initiator Jul 16 14:40:27 qd-db-01 kernel: scsi21 : Broadcom Offload iSCSI Initiator Jul 16 14:40:27 qd-db-01 kernel: scsi22 : Broadcom Offload iSCSI Initiator Jul 16 14:40:29 qd-db-01 kernel: scsi23 : Broadcom Offload iSCSI Initiator Jul 16 14:40:29 qd-db-01 kernel: scsi24 : Broadcom Offload iSCSI Initiator Jul 16 14:40:29 qd-db-01 kernel: scsi25 : Broadcom Offload iSCSI Initiator Jul 16 14:40:29 qd-db-01 kernel: scsi26 : Broadcom Offload iSCSI Initiator Jul 16 14:40:31 qd-db-01 kernel: iscsi: registered transport (tcp) Jul 16 14:40:31 qd-db-01 kernel: iscsi: registered transport (iser) Jul 16 14:40:31 qd-db-01 kernel: iscsi: registered transport (be2iscsi) Jul 16 14:40:31 qd-db-01 iscsid: iSCSI logger with pid=8248 started! Jul 16 14:40:32 qd-db-01 iscsid: transport class version 2.0-871. iscsid version 2.0-871 Jul 16 14:40:32 qd-db-01 iscsid: iSCSI daemon with pid=8249 started! Jul 16 14:40:32 qd-db-01 iscsid: Received iferror -1 Jul 16 14:40:32 qd-db-01 iscsid: cannot make a connection to 10.1.4.10:3260(-1,11) Jul 16 14:40:38 qd-db-01 iscsid: Received iferror -1 Jul 16 14:40:38 qd-db-01 iscsid: cannot make a connection to 10.1.4.10:3260(-1,11) Jul 16 14:40:43 qd-db-01 iscsid: Received iferror -1 Jul 16 14:40:43 qd-db-01 iscsid: cannot make a connection to 10.1.4.10:3260(-1,11) Jul 16 14:40:48 qd-db-01 iscsid: Received iferror -1 .... Routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth4 10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth4 0.0.0.0 10.1.3.1 0.0.0.0 UG 0 0 0 eth0 And here is brcm_iscsi.log INFO [Fri Jul 16 14:40:31 2010]Initialize logger using log file: /var/log/brcm-iscsi.log INFO [Fri Jul 16 14:40:31 2010]Started BRCM iSCSI stack: Ver 0.5.15 INFO [Fri Jul 16 14:40:31 2010]Build date: Sun Jul 11 06:17:31 EDT 2010 INFO [Fri Jul 16 14:40:31 2010]uevent Listening for uevents INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[19]: host19 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host19/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host19/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 19 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[20]: host20 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host20/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host20/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 20 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[21]: host21 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host21/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host21/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 21 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[22]: host22 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host22/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host22/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 22 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[23]: host23 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host23/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host23/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 23 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[24]: host24 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host24/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host24/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 24 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[25]: host25 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host25/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host25/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 25 INFO [Fri Jul 16 14:40:31 2010]nic_utils Found host[26]: host26 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host26/netdev INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/iscsi_host/host26/netdev INFO [Fri Jul 16 14:40:31 2010]nic_utils NIC not found creating an instance for host_no: 26 INFO [Fri Jul 16 14:40:31 2010]NIC_NL Netlink to CNIC on pid 8242 is ready INFO [Fri Jul 16 14:40:31 2010]signal handling thread ready INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc Received request for 'eth4' to set IP address: '10.1.4.31' VLAN: '' INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc Found interface: eth4, using existing NIC INFO [Fri Jul 16 14:40:31 2010]nic_utils looking for uio device for eth4 INFO [Fri Jul 16 14:40:31 2010]nic_utils eth4 associated with uio1 INFO [Fri Jul 16 14:40:31 2010]nic_id eth4: is found at 04:00.00 INFO [Fri Jul 16 14:40:31 2010]eth4: found NIC 'Broadcom NetXtreme II BCM5709 1000Base-T' INFO [Fri Jul 16 14:40:31 2010]nic_utils eth4: spinning up thread for nic INFO [Fri Jul 16 14:40:31 2010]Created nic thread: eth4 INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4 library set using transport_name bnx2i INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4 couldn't find VLAN 0 interface creating it INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4: create network interface INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4: requesting configuration using static IP address WARN [Fri Jul 16 14:40:31 2010]nic_utils eth4: device already disabled: INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4: configuring using static IP IPv4 address :10.1.4.31 INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc netmask :255.0.0.0 INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc ISCSID_UIP_IPC_GET_IFACE: command: 1 name: bnx2i.00:10:18:6a:e4:79, netdev: eth4 ipaddr: 10.1.4.31 vlan: 0 transport_name:bnx2i INFO [Fri Jul 16 14:40:31 2010]iscsi_ipc eth4: started NIC enable thread state: 0x1 ERR [Fri Jul 16 14:40:31 2010]bnx2 /dev/uio1: uio device has been brought up via pid: 8242 on fd: 10 INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/uio/uio1/name INFO [Fri Jul 16 14:40:31 2010]bnx2 eth4: Verified is a cnic_uio device INFO [Fri Jul 16 14:40:31 2010]Done capturing /sys/class/uio/uio1/event INFO [Fri Jul 16 14:40:31 2010]bnx2 eth4: detected using MSI-X vector: 8 INFO [Fri Jul 16 14:40:31 2010]bnx2 eth4: tx_bidx_io: 0x12788 tx_bseq_io: 0x12790 INFO [Fri Jul 16 14:40:31 2010]bnx2 eth4: Using mac address: 0:10:18:6a:e4:79 INFO [Fri Jul 16 14:40:31 2010]nic_utils eth4: Added address 33:33:ff:6a:e4:79 to multicast list for eth4 INFO [Fri Jul 16 14:40:31 2010]eth4: CNIC uio initialized INFO [Fri Jul 16 14:40:31 2010]nic eth4: Initialized ip stack: VLAN: 0 INFO [Fri Jul 16 14:40:31 2010]nic eth4: mac: 00:10:18:6a:e4:79 INFO [Fri Jul 16 14:40:31 2010]nic eth4: Using IP address: 10.1.4.31 INFO [Fri Jul 16 14:40:31 2010]nic eth4: Using netmask: 255.0.0.0 INFO [Fri Jul 16 14:40:31 2010]uip ustack->uip_hostaddr6 IP: :: INFO [Fri Jul 16 14:40:31 2010]uip ustack->link_local_addr IP: fe80::10:18ff:fe6a:e479 INFO [Fri Jul 16 14:40:31 2010]nic eth4: is now enabled done INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc Received request for 'eth4' to set IP address: '10.1.4.31' VLAN: '' INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc Found interface: eth4, using existing NIC INFO [Fri Jul 16 14:40:32 2010]nic_utils looking for uio device for eth4 INFO [Fri Jul 16 14:40:32 2010]nic_utils eth4 associated with uio1 INFO [Fri Jul 16 14:40:32 2010]nic_id eth4: is found at 04:00.00 INFO [Fri Jul 16 14:40:32 2010]eth4: found NIC 'Broadcom NetXtreme II BCM5709 1000Base-T' INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc eth4 library set using transport_name bnx2i INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc eth4: using existing network interface INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc eth4: requesting configuration using static IP address INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc eth4: IP configuration didn't change using 0x2 INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc eth4: NIC already enabled flags: 0x1026 state: 0x2 INFO [Fri Jul 16 14:40:32 2010]iscsi_ipc ISCSID_UIP_IPC_GET_IFACE: command: 1 name: bnx2i.00:10:18:6a:e4:79, netdev: eth4 ipaddr: 10.1.4.31 vlan: 0 transport_name:bnx2i INFO [Fri Jul 16 14:40:32 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:32 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:38 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:38 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:43 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:43 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:48 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:48 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:53 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:53 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:58 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:40:58 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:41:03 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:41:03 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:41:08 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:41:08 2010]uevent Unknown: remove@ /class/iscsi_endpoint/ep-1 INFO [Fri Jul 16 14:41:13 2010]uevent Unknown: add@ /class/iscsi_endpoint/ep-1 (Rebooting server again to see if it comes up on boot) Tarun On Fri, Jul 16, 2010 at 1:51 PM, Benjamin Li <[email protected]> wrote: > Hi Tarun, > > It looks like from the logs that eth0 is not iSCSI licensed but eth4 is > =) > > In addition, I was also wondering if you could also post the following: > > 1. The routing table of the machine. Currently CNIC uses the L2 > routine table to determine which port on the NIC to send requests to. > > 2. If you could also provide the /var/log/brcm_iscsi.log file, we can > also take a look at the Broadcom uIP user space daemon to see if > anything is wrong. To enable deeper debugging for the brcm_iscsiuio > daemon, please modify the /etc/init.d/iscsid init script and append '-d > 100' to the line which start 'brcm_iscsiuio'. This should output all > the debug messages in the daemon. > > Thanks again. > > -Ben > > > On Fri, 2010-07-16 at 12:39 -0700, Tarun Reddy wrote: > > On Mon, Jul 12, 2010 at 9:45 PM, Mike Christie <[email protected]> > > wrote: > > On 07/12/2010 05:26 PM, Tarun Reddy wrote: > > > > Hmm... somehow that got removed. I've rebuilt the > > system (I'm setting up new > > hardware fortunately) and am back to trying it out > > again. Just for > > background, I'm testing out on a Dell R610 with 4 > > onboard nics (no iscsi > > offload enabled) and 4 broadcom nics pci-e cards with > > iscsi offload enabled. > > > > I think I'm missing a basic step here.. but it feels > > close. > > > > > > 1. Installed CentOS 5.5 + updates, w/ > > > > iscsi-initiator-utils-6.2.0.871-0.18.el5 on x86_64 > > machine. > > > > 2. eth0 is set to 10.1.3.20 IP address > > 3. eth4 is set to 10.1.4.30 (MAC > > Address:00:10:18:6A:E4:78) > > 4. Lefthand iscsi is setup on 10.1.4.10 > > 5. I set > > up /var/lib/iscsi/ifaces/bnx2i.00:10:18:6a:e4:79 with > > the > > > > following content > > > > # BEGIN RECORD 2.0-871 > > iface.iscsi_ifacename = bnx2i.00:10:18:6a:e4:79 > > iface.hwaddress = 00:10:18:6a:e4:79 > > iface.ipaddress = 10.1.4.31 > > iface.transport_name = bnx2i > > # END RECORD > > > > 6. iscsiadm -m discovery -t st -I > > bnx2i.00:10:18:6a:e4:79 -p 10.1.4.10 > > returns > > 10.1.4.10:3260,1 > > iqn.2003-10.com.lefthandnetworks:rally-qd:104:testbnxvol > > > > Cool.. looks like I've found the LUN. I think this > > uses the eth4 device > > here, not the bnx2i > > > > > > Yes. That is expected. We will use the offload engine for > > discovery in the next version. > > > > > > Trying to login.. > > > > iscsiadm -m node -l -P 1 > > Logging in to [iface: bnx2i.00:10:18:6a:e4:79, target: > > iqn.2003-10.com.lefthandnetworks:rally-qd:104:testbnxvol, > portal: > > 10.1.4.10,3260] > > iscsiadm: Could not login to [iface: > > bnx2i.00:10:18:6a:e4:79, target: > > iqn.2003-10.com.lefthandnetworks:rally-qd:104:testbnxvol, > portal: > > 10.1.4.10,3260]: > > iscsiadm: initiator reported error (4 - encountered > > connection failure) > > > > in /var/log/messages.. > > Jul 12 16:21:01 qd-db-01 iscsid: Received iferror -1 > > Jul 12 16:21:01 qd-db-01 iscsid: cannot make a > > connection to > > 10.1.4.10:3260(-1,11) > > > > > > > > Are there some bnx2i messages in /var/log/messages and could > > you send them too? > > > > Also what is the Centos 5.5 kernel version? > > > > > > > > Sorry it took me so long to get back to you.. > > Here are all of the bnx2i messages in /var/log/messages while doing > > a /etc/init.d/iscsi restart > > > > > > Jul 16 13:36:00 qd-db-01 iscsid: iscsid shutting down. > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth7 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth6 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth5 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth4 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth3 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth2 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth1 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Removed CNIC device: eth0 > > Jul 16 13:36:00 qd-db-01 kernel: Loading iSCSI transport class > > v2.0-871. > > Jul 16 13:36:00 qd-db-01 kernel: cxgb3i: tag itt 0x1fff, 13 bits, age > > 0xf, 4 bits. > > Jul 16 13:36:00 qd-db-01 kernel: iscsi: registered transport (cxgb3i) > > Jul 16 13:36:00 qd-db-01 kernel: Broadcom NetXtreme II CNIC Driver > > cnic v2.1.0 (Oct 10, 2009) > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth0 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth1 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth2 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth3 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth4 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth5 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth6 > > Jul 16 13:36:00 qd-db-01 kernel: cnic: Added CNIC device: eth7 > > Jul 16 13:36:00 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 16 13:36:00 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 16 13:36:00 qd-db-01 kernel: scsi11 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi12 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi13 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi14 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi15 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi16 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi17 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:00 qd-db-01 kernel: scsi18 : Broadcom Offload iSCSI > > Initiator > > Jul 16 13:36:02 qd-db-01 kernel: iscsi: registered transport (tcp) > > Jul 16 13:36:02 qd-db-01 kernel: iscsi: registered transport (iser) > > Jul 16 13:36:02 qd-db-01 kernel: iscsi: registered transport > > (be2iscsi) > > Jul 16 13:36:02 qd-db-01 iscsid: iSCSI logger with pid=8137 started! > > Jul 16 13:36:03 qd-db-01 iscsid: transport class version 2.0-871. > > iscsid version 2.0-871 > > Jul 16 13:36:03 qd-db-01 iscsid: iSCSI daemon with pid=8138 started! > > > > > > And the kernel is 194.8.1. > > > > > > Thank you, > > Tarun > > > > > > (Actually here is grep bnx /var/log/messages since this is a newly > > built machine and it is small) > > Jul 12 14:46:36 qd-db-01 kernel: Broadcom NetXtreme II Gigabit > > Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) > > Jul 12 14:46:38 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 12 14:46:38 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 12 14:46:38 qd-db-01 kernel: bnx2: eth0: using MSIX > > Jul 12 14:46:38 qd-db-01 kernel: bnx2i: iSCSI not supported, dev=eth0 > > Jul 12 14:46:38 qd-db-01 kernel: bnx2i: iSCSI not supported, dev=eth0 > > Jul 12 14:46:38 qd-db-01 kernel: bnx2: eth0 NIC Copper Link is Up, > > 1000 Mbps full duplex > > Jul 12 14:54:41 qd-db-01 kernel: bnx2: eth4: using MSIX > > Jul 12 14:54:41 qd-db-01 kernel: bnx2i [04:00.00]: ISCSI_INIT passed > > Jul 12 14:54:44 qd-db-01 kernel: bnx2: eth4 NIC Copper Link is Up, > > 1000 Mbps full duplex > > Jul 12 14:55:05 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 12 14:55:05 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 12 14:55:53 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 12 14:55:53 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 12 15:00:08 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 12 15:00:08 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 12 16:29:14 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 12 16:29:14 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 12 16:29:22 qd-db-01 kernel: bnx2i [04:00.00]: ISCSI_INIT passed > > Jul 12 16:29:34 qd-db-01 kernel: bnx2i [04:00.00]: ISCSI_INIT passed > > Jul 12 17:07:20 qd-db-01 kernel: Broadcom NetXtreme II Gigabit > > Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) > > Jul 12 17:07:23 qd-db-01 kernel: bnx2: eth0: using MSIX > > Jul 12 17:07:23 qd-db-01 kernel: bnx2: eth0 NIC Copper Link is Up, > > 1000 Mbps full duplex > > Jul 16 13:35:38 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 16 13:35:38 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > Jul 16 13:36:00 qd-db-01 kernel: Broadcom NetXtreme II iSCSI Driver > > bnx2i v2.1.0 (Dec 06, 2009) > > Jul 16 13:36:00 qd-db-01 kernel: iscsi: registered transport (bnx2i) > > > > > > Tarun > > > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
