On 25 Aug., 02:14, Mike Christie <[email protected]> wrote: > On 08/24/2010 10:13 AM, Michael Wolf wrote: > > > > > > > Hi ALL, > > > I try to set up oracle cluster with four nodes (DELL R610) and > > EqualLogig PS6000. > > Servers has four Broadcom 5709C dual network cards, two intenal, two > > PCI cards. > > I`m trying to get the bnx2i driver to work using iSCSI offload for > > four channels. > > I can't get it to work, getting error > > iscsiadm: Could not login to [iface: bnx2i.00:22:19:68:3a:04, target: > > iqn.2001-05.com.equallogic:0-8a0906-76c630e04-e0492d35ddc63f-a1test, > > portal: 10.10.77.10,3260): > > iscsiadm: initiator reported error (4 - encountered connection > > failure) > > > Showing nothing in /var/log/messages and no events on the EQ box. > > So there is no iferror error in messages or nothing from iscsid? > > > DELL suport team is not shure if bnx2i driver will work with RHEL 5.5, > > they ask me to reinstall RHEL 5.2, from my opinion is that not an > > option. > > I am using RHEL 5.5, oracle linux, kernel 2.6.18-194.11.1.0.1.el5 on > > Is that a oracle linux kernel or the rhel 5.5 one? Are you running rhel > 5.5 in a oracle linux vm? > > > x86_64 > > iscsi-initiator-utils-6.2.0.871-0.16.el5 > > Also you need the updated iscsi > utils.http://people.redhat.com/mchristi/iscsi/rhel5.6/iscsi-initiator-utils/ > > > All firmware of the R610 is up to date > > > All interfaces are shown as bnx2i > > [r...@ora-db-rac1-04 ~]# scsiadm -m iface > > -bash: scsiadm: command not found > > [r...@ora-db-rac1-04 ~]# iscsiadm -m iface > > default tcp,<empty>,<empty>,<empty>,<empty> > > iser iser,<empty>,<empty>,<empty>,<empty> > > bnx2i.00:22:19:68:3a:04 bnx2i,00:22:19:68:3a: > > 04,10.10.77.69,<empty>,<empty> > > Are these IPs on the same subnet as the network port they are attached to? > > > > > > > bnx2i.00:22:19:68:3a:0a bnx2i,00:22:19:68:3a:0a, > > 10.10.77.68,<empty>,<empty> > > bnx2i.00:00:00:00:00:00 bnx2i, > > 00:00:00:00:00:00,<empty>,<empty>,<empty> > > bnx2i.00:22:19:68:3a:06 bnx2i,00:22:19:68:3a: > > 06,10.10.77.67,<empty>,<empty> > > bnx2i.00:10:18:64:2e:5b bnx2i,00:10:18:64:2e:5b, > > 10.10.77.66,<empty>,<empty> > > bnx2i.00:10:18:64:98:bb bnx2i,00:10:18:64:98:bb, > > 10.10.77.65,<empty>,<empty> > > bnx2i.00:22:19:68:3a:08 bnx2i,00:22:19:68:3a: > > 08,10.10.77.64,<empty>,<empty> > > bnx2i.00:10:18:64:98:b9 bnx2i, > > 00:10:18:64:98:b9,10.10.77.63,<empty>,<empty> > > > Only four of them are connected to the SAN. How to figure out which hw- > > adress belongs to which interface? > > Start the iscsi service (or at least make sure bnx2i is loaded) then run: > > [r...@meanminna kernel]# iscsiadm -m host -P 1 > Host Number: 8 > State: running > Transport: bnx2i > Initiatorname: <empty> > IPaddress: <empty> > HWaddress: 00:10:18:15:fd:f1 > Netdev: eth1 > > You can see the network device the iscsi offload interface is attached > to (in this case eth1), and you can see the MAC/hwaddress for the iscsi > interface. > > > Is bnx2i driver supported for RHEL5.5? > > Yes. > > > Is there a more detailed description for setting up such an > > environment as the RedHat manuals? > > Section 5.1.2 Setting up a iface for a iSCSI offload card of the iscsi > readme in /usr/share/docs/iscsi-initiator-utils-$VERSION/README- Zitierten > Text ausblenden - > > - Zitierten Text anzeigen -- Zitierten Text ausblenden - > > - Zitierten Text anzeigen -
Hi Mike, Trying to connect to the EQL box there are no messagese at all. On these oracle related boxes we use the oracle linux kernel. We do not use oracle linux vm. Are there any issues with this kernel and iscsi? I have downloaded the update and will install and test with this release, I will come back to you with the results. All storage IPs are on the same subnet 10.10.77.00. The EQL box listens to 10.10.77.10. Kind regards Michael -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
