On 10/04/2010 11:51 AM, joachim.deschrij...@ugent.be wrote:
Hi all,
I am trying to setup a backup partition on a 40TB storage server.
There are already partitions setup on that server that are working, so
the storage server configuration is ok.
So I have another server where I need the storage, which I will call
worker-server for the sake of explanation and storage-server is the
40TB one.
Using openfiler:
* I created a 4TB partition on the storage-server
* created a target
* did LUN mapping
* created a network entry (255.255.255.255 mask, ok?)
* allowed access to it.
So I log into the worker-server:
* I install iscsi-initiator-utils
* chkconfig iscsi on
* I checked initiatorname.iscsi, there is something there, so should
be ok?
* I run service iscsi start -> Setting up iSCSI targets: iscsiadm: No
records found! ...
* Needless to say, discovery is blank as well when I run iscsiadm --
mode discovery --type sendtargets --portal<ip_address>
Am I doing something completely wrong? Anyone any suggestion?
That last time this was reported the user had to modify the target a
little more. Here is what they said they had to do:
Thanks for your reply. I was able to resolve the issue by modifying
/etc/initiator.deny and commenting all the lines that were denying access to
configured disk.
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-is...@googlegroups.com.
To unsubscribe from this group, send email to
open-iscsi+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
